SECURITIES AND EXCHANGE COMMISSION
Washington, D.C. 20549
ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
For the fiscal year ended October 1, 2021
TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934
For the transition period from __________to__________
Commission file number: 001-35451
MACOM Technology Solutions Holdings, Inc.
(Exact name of registrant as specified in its charter)
(State or other jurisdiction of incorporation or organization)
(I.R.S. Employer Identification No.)
100 Chelmsford Street
Lowell, MA 01851
(Address of principal executive offices and zip code)
(Registrant’s telephone number, including area code)
Securities registered pursuant to Section 12(b) of the Act:
Title of Each Class
Name of Each Exchange on Which Registered
Common Stock, par value $0.001 per share
Nasdaq Global Select Market
Securities registered pursuant to Section 12(g) of the Act: None
Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.
☑ Yes ☐ No
Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or 15(d) of the Act.
☐ Yes ☑ No
Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.
☑ Yes ☐ No
Indicate by check mark whether the registrant has submitted electronically every Interactive Data File required to be submitted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit such files). ☑ Yes ☐ No
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, smaller reporting company, or an emerging growth company. See the definitions of “large accelerated filer”, “accelerated filer”, “smaller reporting company” and “emerging growth company” in Rule 12b-2 of the Exchange Act.
Large accelerated filer
Smaller reporting company
Emerging growth company
If an emerging growth company, indicate by check mark if the registrant has elected not to use the extended transition period for complying with any new or revised financial accounting standards provided pursuant to Section 13(a) of the Exchange Act. ☐
Indicate by check mark whether the Registrant has filed a report on and attestation to its management’s assessment of the effectiveness of its internal control over financial reporting under Section 404(b) of the Sarbanes-Oxley Act (15 U.S.C. 7262(b)) by the registered public accounting firm that prepared or issued its audit report. ☑ Yes ☐ No
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).
☐ Yes ☑ No
The aggregate market value of the registrant’s common stock held by non-affiliates of the registrant as of April 2, 2021, the last business day of the registrant's second fiscal quarter, was approximately $2.8 billion based on the closing price of the registrant’s common stock as of such date as reported on the Nasdaq Global Select Market. For purposes of the foregoing calculations only, shares of common stock held by each executive officer and director of the registrant and their respective affiliates have been excluded, as such persons may be deemed to be affiliates. This determination of affiliate status is not necessarily a conclusive determination for other purposes.
The number of outstanding shares of the registrant’s common stock, par value $0.001 per share, as of November 11, 2021 was 69,611,633.
DOCUMENTS INCORPORATED BY REFERENCE
Part III incorporates certain information by reference from the registrant's definitive proxy statement for the 2022 Annual Meeting of Stockholders, which will be filed no later than 120 days after the close of the registrant's fiscal year ended October 1, 2021.
MACOM TECHNOLOGY SOLUTIONS HOLDINGS, INC.
ANNUAL REPORT ON FORM 10-K
FOR THE FISCAL YEAR ENDED OCTOBER 1, 2021
TABLE OF CONTENTS
This Annual Report on Form 10-K (“Annual Report”) contains forward-looking statements, including statements regarding our business outlook, strategic plans and priorities, expectations, anticipated drivers of future revenue growth, industry trends, the potential impacts of COVID-19 on our future operations and results, our plans for use of our cash and cash equivalents and short-term investments, our ability to meet working capital requirements, estimates and objectives for future operations, our future results of operations and our financial position. Forward-looking statements generally may be identified by terms such as “anticipates,” “believes,” “could,” “continue,” “estimates,” “expects,” “intends,” “may,” “plans,” “potential,” “predicts,” “projects,” “seeks,” “should,” “targets,” “will,” “would” or similar expressions or variations or the negatives of those terms.
Forward-looking statements are neither historical facts nor assurances about future performance. Instead, they are based only on our current beliefs, expectations and assumptions. Because forward-looking statements relate to the future, such statements involve inherent risks, changes and uncertainties that are difficult to predict and many of which are outside of our control. A number of important factors could cause actual results and outcomes to differ materially and adversely from those expressed or implied by our forward-looking statements. We urge you to consider the risks and uncertainties in “Item 1A - Risk Factors” and elsewhere in this Annual Report and the other documents filed by us with the Securities and Exchange Commission (the “SEC”). Except as required by law, we undertake no obligation to revise or update our forward-looking statements to reflect any event or circumstance that may arise after the date of this Annual Report.
In this document, the words “MACOM,” “Company,” “we,” “our,” “us,” and similar terms refer only to MACOM Technology Solutions Holdings, Inc. and its consolidated subsidiaries, and not any other person or entity.
“MACOM,” “MACOM Technology Solutions,” “MACOM KV CAPS” and related logos are trademarks of MACOM Technology Solutions Holdings, Inc. All other brands and names listed are trademarks of their respective owners.
ITEM 1. BUSINESS
We design and manufacture semiconductor products for Telecommunications (“Telecom”), Industrial and Defense (“I&D”) and Data Center industries. Headquartered in Lowell, Massachusetts, with operational facilities throughout North America, Europe and Asia, we design, develop and manufacture differentiated semiconductor products for customers who demand high performance, quality and reliability. We have more than 70 years of application expertise, combined with expertise in analog and mixed signal circuit design, compound semiconductor fabrication (including gallium arsenide (“GaAs”), indium phosphide (“InP”) and specialized silicon), advanced packaging and back-end assembly and test. We offer a broad portfolio of thousands of standard and custom devices, which include integrated circuits (“IC”), multi-chip modules (“MCM”), diodes, amplifiers, switches and switch limiters, passive and active components and complete subsystems, across dozens of product lines serving over 6,000 end customers in three primary markets. Our semiconductor products are electronic components that our customers incorporate into larger electronic systems, such as wireless communication systems including basestations, high capacity optical networks, data center applications, radar, medical systems and test and measurement applications. Our primary end markets are: (1) Telecom, which includes carrier infrastructure such as long-haul/metro, 5G and Fiber-to-the-X (“FTTx”)/passive optical network (“PON”), among others; (2) I&D, which includes military and commercial radar, radio frequency (“RF”) jammers, electronic countermeasures, communication data links, satellite communications and multi-market applications, which include industrial, medical, test and measurement and scientific applications; and (3) Data Center, which includes intra-Data Center, Data Center Interconnect (“DCI”) applications, at 100G, 200G, 400G, 800G and higher speeds, enabled by our broad portfolio of analog ICs and photonic components for high speed optical module customers.
Many of our products have long life cycles ranging from five to ten years, and some of our products have been generating revenue for over 20 years. We continue to develop new products and technologies to improve our ability to serve our primary markets. Our growth strategy is focused on expanding our product portfolio, strengthening our customer relationships and capturing more design wins in order to increase our market share. As we grow our portfolio and technology base, we believe our customers will select more of our components for use in their systems.
Our manufacturing model consists of domestic semiconductor wafer fabrication assembly and test capabilities coupled with domestic and international external foundry and assembly and test partners. We operate semiconductor fabrication facilities at our Lowell, Massachusetts headquarters and in Ann Arbor, Michigan. Our facilities are certified to the International Organization for Standardization (“ISO”) 9001 international quality standard, the ISO14001 environmental management standard and the ANSI/ESD S20.20:2014 standard. We manufacture compound semiconductors including GaAs and InP. In the I&D markets, a domestic fabrication facility may be a requirement to be a strategic supplier, and we believe our status as a “Trusted Foundry” offers us further competitive differentiation.
We also utilize external semiconductor foundries to access additional process technologies and provide additional capacity. We believe that our ability to utilize a broad array of internal proprietary process technologies and commercially available foundry
technologies allows us to select the most appropriate technology to solve our customers’ needs. We believe that this strategy provides us with dependable supply, control over quality, reduced capital investment requirements, faster time to market and additional outsourced capacity when needed. In addition, the experience base cultivated through the continued operation of our internal fabrication lines provides us with the expertise to better manage our external foundry suppliers.
Research and Development
Our research and development efforts are directed toward the rapid development of new and innovative products, process technologies and packaging techniques. The interaction of semiconductor process technology, circuit design and packaging technology defines the performance parameters and the customers’ acceptance of our products. We believe some of our core competencies are the ability to model, design, test, integrate, package and manufacture differentiated solutions for our customers. We leverage these core competencies to solve difficult and complex challenges that our customers face during their system design phases. We believe our integrated and customized solutions offer customers high performance, quality, reliability and faster time to market.
Circuit design and device modeling expertise. Our engineers are experts in the design of analog and mixed signal circuits capable of reliable, high-performance RF, microwave, millimeter wave and optical signal transmission and conditioning. Our staff has decades of experience in solving complex design challenges in applications involving high frequency, high power and environmentally-rugged operating conditions.
Semiconductor process technology. We leverage our domestic semiconductor wafer fabrication capabilities and our foundry suppliers to offer customers the right process technology to meet their particular requirements. Depending on the requirements for the application, our semiconductor products may be designed using an internally developed or externally sourced process technology.
Packaging expertise. Our extensive packaging expertise enables us to model the interaction between the semiconductor and its package. Our engineers make adjustments in the design of both the semiconductor and the package, to take account of that interaction. We offer products in a variety of different package types for specific applications, including plastic over-molded, ceramic and laminate-based packaging.
We continue to invest in proprietary processes to enable us to develop and manufacture high-value solutions. For example, we have developed innovative technologies such as heterolithic microwave integrated circuit (“HMIC”), which provides high integration, high power and low loss switching capabilities for our primary markets. More recently, we developed an innovative semiconductor process to support the introduction of a new high voltage capacitor product line, branded as MACOM KV CAPS, which represents the industry’s highest voltage silicon-based capacitors.
Our engineers’ radar, optical, microwave and millimeter wave system-level design expertise allow us to offer differentiated solutions that leverage multiple process technologies and are integrated into a single, higher-level assembly, thereby delivering our customers enhanced functionality.
Our Markets and Products
Our core strategy is to develop and innovate high-performance products that address our customers’ technical challenges in our primary markets: Telecom, I&D and Data Center. While sales in any or all of our primary markets may slow or decline from period to period, over the long-term we generally expect to benefit from growth in these markets. We expect our revenue in the Telecom market to be driven, in part, by 5G deployments, with continued upgrades and expansion of communications equipment, increasing adoption of bandwidth rich services. We expect our revenue in the I&D market to be driven by the expansion of our product portfolio which services test and measurement, satellite communications, civil and military radar, scientific, medical and other industrial applications. We expect revenue growth in the Data Center market to be driven by the adoption of cloud-based services and the upgrade of data center architectures to 100G, 200G, 400G and 800G interconnects, which we expect will drive adoption of higher speed optical and photonic wireless links.
Telecom. Underlying growth in the Telecom market is driven by the ever-growing need for increased bandwidth to support data rich applications and services such as video conferencing, cloud computing, video-on-demand and social media. Growth in next-generation Internet and Internet of Things applications drives global demand for communications infrastructure equipment requiring amplifiers, filters, receivers, switches, synthesizers, transformers, upconverters and other components to expand and upgrade cellular backhaul, cellular infrastructure, wired broadband and fiber optic networks. Semiconductor products and solutions must continually deliver greater bandwidth and functionality as the demands of our customers and end users increase.
Our expertise in system-level architectures and advanced IC design capability enables us to offer network original equipment manufacturer (“OEM”) customers highly-integrated solutions optimized for performance and cost. Our portfolio of opto-electronics products includes lasers, clock and data recovery, optical post amplifiers, laser and modulator drivers, transimpedance amplifiers, transmitter and receiver applications in 2.5/10/40/100/400 gigabits per second long haul, metro, data center links and FTTx fiber optic network components that enable telecommunications carriers and data centers to cost-efficiently increase their network capacity by a factor of four to ten times over earlier generation solutions. We match our opto-electronic components to various lasers enabling our customers to buy more complete solutions for their opto-electronic systems. For optical communications applications, we utilize a
proprietary combination of GaAs, InP and Silicon Germanium (“SiGe”) technologies to obtain advantages in performance and size. For wired broadband applications, we offer OEM customers the opportunity to streamline their supply chain through our broad catalog of active components such as active splitters, amplifiers, multi-function ICs and switches, as well as passive components such as transformers, diplexers, filters, power dividers and combiners.
Industrial & Defense. In the I&D market, military applications require advanced electronic systems, such as radar warning receivers, communications data links and tactical radios, unmanned aerial vehicles, RF jammers, electronic countermeasures and smart munitions. Military applications are becoming more sophisticated and requiring more high speed bandwidth, favoring higher performance semiconductor ICs based on GaAs and Gallium Nitride (“GaN”) technologies due to their high power density, improved power efficiency and broadband capability.
We believe our analog design capabilities, technology portfolio, in-depth knowledge of critical radar system requirements, integration expertise and track record of reliability make us a valued resource for our I&D customers faced with demanding application parameters. Further, we have been accredited by the United States Department of Defense with “Trusted Foundry” status, a designation conferred on microelectronics vendors exhibiting the highest levels of process integrity and protection, which we believe differentiates us as a trusted manufacturer of ICs for U.S. military and aerospace applications. For radar applications, we offer standard and custom amplifiers, discrete components, switch limiters, phase shifters and integrated modules for transmit and receive functions in air traffic control, marine, weather, and military radar applications. For military communications data link and tactical radio applications, we offer a family of active, passive and discrete products, such as Monolithic Microwave Integrated Circuits (“MMICs”), control components, voltage-controlled oscillators (“VCOs”), transformers, power pallets, amplifiers and diodes. We believe manufacturing products in our Lowell, Massachusetts Trusted Foundry offers us a competitive advantage in the I&D market because of certain customers’ requirements for a domestic supply chain.
Growth in the I&D business is also driven by multi-market applications encompassing industrial, medical, test and measurement and scientific applications, where analog RF, microwave and millimeter wave semiconductor solutions are gaining prevalence. In addition, evolving medical technology has increased the need for high-performance MMICs and other semiconductor solutions in medical imaging and patient monitoring to provide enhanced analysis and functionality.
In the medical industry, our custom designed non-magnetic diode product line is a critical component for certain MRI applications. For sensing and test and measurement applications, we believe our HMIC process is ideal for high-performance, integrated bias networks and switches. Our catalog of general purpose GaAs ICs includes low noise amplifiers, switches and power amplifiers that address a wide range of applications such as industrial automation systems to test and measurement equipment.
Data Center. Demand by Cloud Data Center providers for faster data delivery speeds at cost-effective prices is growing rapidly, where higher speeds are necessary to process the current growth in traffic. To solve these challenges, we leverage our broad optical and photonic portfolio of products to enable our customers to deliver optical transceivers that meet the requirements of today’s Cloud Data Center deployments. By building a comprehensive portfolio of complementary products that enable our customers’ optical transceiver applications, we can offer high performing, cost-effective component solutions for next-generation networks.
We enable the market with a complete product portfolio of PAM-4 PHYs, TIAs, Modulator Drivers, Lasers and Silicon Photonics, and, in some cases, individual component designs are optimized for use together as a chip-set.
To address our primary markets, we offer a broad range of standard and custom ICs and components. Our product catalog currently consists of thousands of products including the following key product platforms: amplifiers, ICs, diodes, switches and switch limiters, passive and active components and multi-chip modules. Many of our product platforms are leveraged across multiple markets and applications. For example, our application expertise with regard to power amplifier technology is leveraged across both scientific laboratory equipment applications and commercial and defense radar system applications. Our diode technology is used in switch filter banks of military tactical radios as well as medical imaging MRI systems.
The table below presents the major product families and major applications in our primary markets.
|PRIMARY MARKET||MAJOR PRODUCT FAMILIES||PRIMARY MARKET||MAJOR PRODUCT FAMILIES||PRIMARY MARKET||MAJOR PRODUCT FAMILIES|
|Telecom||Amplifiers||Industrial & Defense||Amplifiers||Data Center||Clock and Data Recovery|
|Comb Generators||Capacitors||Crosspoint Switches|
|Control Products||Comb Generators||Lasers|
|Crosspoint Switches||Control Products||Modulator Drivers|
|Diodes||Diodes||Optical Post Amplifiers|
|HDcctv Cable Devices||Limiters||Optical Receivers|
|Passives||Phase Shifters||PHY Embedded Processors|
|Phase Shifters||RF Power Products||Silicon Photonic Integrated Devices|
|PHY Embedded Processors||Switches|
|RF Power Products||Voltage Controlled Oscillators|
|Voltage Controlled Oscillators|
Sales and Marketing
We employ a global multi-channel sales strategy and support model intended to facilitate customers’ evaluations and selections of our products. We sell through our direct sales force, our application engineering staff, our global network of independent sales representatives, resellers and distributors. We have strategically positioned our direct sales and applications engineering staff in locations worldwide, augmented by independent sales representatives and distributors with additional domestic and foreign locations to offer responsive local support resources to our customers and to build long-term relationships. Our application engineers visit customers at their engineering and manufacturing facilities, aid them in understanding our capabilities and collaborate with them to deliver products that can optimize their system performance. Our global independent sales representatives and distributor network allow us to extend our sales capabilities to new customers in new geographies more cost effectively than using our direct sales force alone.
Our products are principally sold in North America, Asia and Europe, which is where we concentrate our direct sales force, applications engineering staff, independent sales representatives and distributors. Sales to our distributors accounted for 35.0%, 45.3% and 33.3% of our revenue in fiscal years 2021, 2020 and 2019, respectively. Our agreements with sales representatives, resellers and distributors may provide for an initial term of one or more years with the opportunity for subsequent renewals or for an indefinite term, and also typically provide that either party may terminate the agreement for convenience with a minimum period of prior notice to the other party, usually between 30 and 90 days.
Our sales efforts are focused on the needs of our customers in our three primary markets rather than on particular product lines, facilitating product cross-selling across end markets, and within key accounts. Through our website, customers can inquire about our products, request samples and access our product selection guides, detailed product brochures and data sheets, application notes, suggested design block diagrams and test fixture information, technical articles and information regarding quality and reliability.
Our customer base is diversified and includes OEM customers, contract manufacturers, resellers and distributors. One of our distributors, Richardson RFPD, Inc., (“Richardson”), accounted for 10.7%, 13.5% and 16.1% of our revenue in fiscal years 2021, 2020 and 2019, respectively. Sales to two other resellers, Gateway Tech Company Limited (“Gateway”) and Pangaea (H.K.) Limited (“Pangaea”), both individually accounted for 11.5% of our revenue in fiscal year 2020, but did not individually exceed 10% in fiscal years 2021 or 2019. For fiscal years 2021, 2020 and 2019, no direct customer individually accounted for 10% or more of our revenue and sales to our top 25 direct customers accounted for an aggregate of 43.7%, 40.0% and 47.5% of our revenue, respectively.
Our orders from and sales to customers in the telecommunications infrastructure and networking markets may tend to be lower in our first fiscal quarter as compared to other quarters due to seasonal inventory management by large OEM and contract manufacturing customers.
The markets for our products are highly competitive and are characterized by continuously evolving customer requirements. We believe that the principal competitive factors in our markets include:
▪the ability of engineering talent to drive innovation and new product development;
▪the ability to timely design and deliver products and solutions that meet or exceed customers’ performance, reliability and price requirements;
▪the breadth and diversity of product offerings;
▪the ability to provide a reliable supply of products in sufficient quantities and in a timely manner;
▪the quality of customer service and technical support; and
▪the financial reliability, operational stability and reputation of the supplier.
We believe that we compete favorably with respect to these factors. We compete primarily with both our customers’ internal design resources and other suppliers of high-performance analog semiconductor solutions for use in wireless and wireline RF, microwave, millimeter wave and photonic applications, some of whom have greater financial resources and scale than us. We expect competition in our markets to change as new competitors enter these markets, existing competitors merge or form alliances and new technologies emerge. We believe that in the future there will be increased competition from companies utilizing alternative technologies, including high-volume manufacturers using low-cost silicon process technology. Some of our competitors are also our customers, and in certain product categories we compete with semiconductor manufacturers from which we also obtain foundry services.
In the Telecom and Data Center markets, we compete with NXP Semiconductors N.V. (“NXP”), Marvell Technology Inc. (“Marvell”), Maxlinear Inc. (“Maxlinear”), Broadcom Inc. (“Broadcom”) and Semtech Corporation (“Semtech”). In the I&D market, we compete with Analog Devices, Inc. (“ADI”), Wolfspeed, Inc. (“Wolfspeed”), Microchip Technology Incorporated (“Microchip”), Qorvo, Inc. (“Qorvo”) and Skyworks Solutions, Inc. (“Skyworks”).
Backlog and Inventory
Our sales are made primarily on a purchase order basis, rather than pursuant to long-term contracts where the customer commits to buy any minimum amount of product over an extended period. We also frequently ship products from our inventory shortly after receipt of an order, which we refer to as “turns business.” Unanticipated fluctuations in turns business may result in material shifts in revenue between fiscal quarters. Due to the foregoing factors, different ordering patterns of our customers and the wide range of lead times to produce and deliver our products, we believe that backlog as of any particular date may not be a reliable indicator of our future revenue levels.
Our success depends in part upon our ability to protect our intellectual property. To accomplish this, we rely on a combination of intellectual property rights, including patents, copyrights, trademarks and trade secrets, as well as customary contractual protections with our customers, suppliers, employees and consultants.
As of October 1, 2021, we had 607 U.S. and 162 foreign issued patents and 95 U.S. and 150 foreign pending patent applications covering elements of semiconductor devices, circuit design, manufacturing and wafer fabrication. We do not know whether any of our pending patent applications will result in the issuance of patents or whether the examination process will require us to narrow our claims. The expiration dates of our patents range from 2021 to 2040. We do not regard any of the patents scheduled to expire in the next twelve months as material to our overall intellectual property portfolio. Notwithstanding our active pursuit of patent protection when available, we believe that our future success will be determined by the innovation, technical expertise and management abilities of our engineers and management more than by patent ownership.
The semiconductor industry is characterized by the existence of a large number of patents, copyrights, trademarks and trade secrets, and by the vigorous pursuit, protection and enforcement of intellectual property rights. Many of our customer agreements require us to indemnify our customers for third-party intellectual property infringement claims, which may in the future require that we defend those claims and might require that we pay damages in the case of adverse rulings. Claims of this sort could harm our relationships with our customers and might deter future customers from doing business with us. With respect to any intellectual property rights claims against us or our customers or distributors, we may be required to cease manufacture of the infringing product, pay damages or settlement amounts, expend resources to develop non-infringing technology, seek a license, which may not be available on commercially reasonable terms or at all, or relinquish patents or other intellectual property rights.
Manufacturing, Sources of Supply and Raw Materials
When designing a product solution for our customers, we may choose to utilize our internal proprietary process technologies or technologies from external fabrication facilities, or a combination of both. We believe our ability to select both internal and external technologies in our product solutions is a competitive advantage because it helps us to provide a unique and optimized solution for our customers.
Our internal wafer fabrication and the majority of our internal assembly and test operations are conducted at our Lowell, Massachusetts headquarters. We believe having U.S.-based wafer fabrication is a competitive advantage for us over competitors that
do not have this capability, because it enables us to offer proprietary processes, and provides us with greater control over quality, a secure source of supply and a domestic source for U.S. I&D customers. We also believe that our U.S.-based wafer fabrication facilitates shorter time to market for both new and existing products, shorter production lead times than if we utilized external foundries and allows us to efficiently produce a wide range of low, medium and high volume products. We perform internal assembly and test functions at our Lowell, Massachusetts, Nashua, New Hampshire, Ann Arbor, Michigan and Hsinchu, Taiwan locations.
We complement our internal manufacturing with outsourced foundry partners and other suppliers. Our operations team has extensive expertise in the management of outsourced manufacturing service providers and other supply chain participants. We believe our fab-lite model of outsourcing certain of our manufacturing activities rather than investing heavily in capital-intensive production facilities provides us with the flexibility to respond to new market opportunities, simplifies operations, provides access to a wider array of process technologies and additional manufacturing capacity and reduces our capital requirements. We also use third-party contract manufacturers for assembly, packaging and test functions, and in some cases for fully-outsourced turnkey manufacturing of our products.
The principal materials used in the production of our IC products are high purity source materials such as gallium, aluminum, arsenic, nitrite, carbon and silicon. We purchase from hundreds of suppliers worldwide, a wide variety of semiconductors, wafers, packages, metals, printed circuit boards, electromechanical components and other materials for use in our operations. These supply relationships are generally conducted on a purchase order basis. The use of external suppliers involves a number of risks, including the possibility of material disruptions in the supply of key raw materials and components, and the lack of control over delivery schedules, capacity, quality and costs.
While we attempt to maintain alternative sources for our principal raw materials to reduce the risk of supply interruptions or price increases, some of the raw materials and components are not readily available from alternate suppliers due to their unique nature, design or the length of time necessary for re-design or qualification. We routinely utilize single sources of supply for various materials based on availability, performance, efficiency or cost considerations. For example, wafers procured from merchant foundries for a particular process technology are generally sourced through a single foundry on which we rely for all of our wafers in that process. Our reliance on external suppliers puts us at risk of supply chain disruption if a supplier does not have sufficient raw material inventory to meet our manufacturing needs, goes out of business, experiences capacity constraints or temporary facility closures, changes or discontinues the process in which components or wafers are manufactured or declines to continue supplying us for competitive or other reasons, as discussed in more detail in “Item 1A - Risk Factors” herein. Where practical, we attempt to mitigate these risks by qualifying multiple sources of supply, redesigning products for alternative components and purchasing incremental inventory of raw materials and components in order to protect us against supply disruptions.
The goal of our quality assurance program is for our products to meet our customers’ requirements, be delivered on time, and function reliably throughout their useful lives. The ISO provides models for quality assurance for various operational disciplines, such as design, manufacturing, and testing, which comprise part of our overall quality management system. Our following locations have each received ISO 9001:2015 certifications in one or more of their principal functional areas: Lowell, Massachusetts; Cork, Ireland; Ithaca, New York; Santa Clara and Newport Beach, California; Morrisville, North Carolina; Ann Arbor, Michigan; Nashua, New Hampshire; and Hsinchu, Taiwan. In addition, our Lowell, Massachusetts facility has received an ISO 14001:2015 environmental management systems certification, and, in October 2021, it received an IATF 16949 Automotive Quality Management System certification.
The ESD Association provides standards for safe and proper handling of electrostatic discharge (“ESD”) in electronic manufacturing environments. Our following locations have each received ANSI/ESD S20.20:2014 certification: Lowell, Massachusetts; Ann Arbor, Michigan; Allentown, Pennsylvania; Morrisville, North Carolina; and Hsinchu, Taiwan.
Our operations involve the use of hazardous substances and are regulated under federal, state and local laws governing health and safety and the environment in the U.S. and other countries. These regulations include limitations on discharge of pollutants into the air, water and soil; remediation requirements; product chemical content limitations; manufacturing chemical use and handling restrictions; pollution control requirements; waste minimization considerations; and, requirements regarding the treatment, transport, storage and disposal of hazardous wastes. We are also subject to regulation by the U.S. Occupational Safety and Health Administration and similar health and safety laws in other jurisdictions. While we are committed to compliance with applicable regulations, the risk of environmental liabilities can never be completely eliminated and there can be no assurance that the application of environmental and health and safety laws to our business will not require us to incur material future expenditures.
We are also regulated under a number of federal, state and local laws regarding responsible sourcing, recycling, product packaging and product content requirements in the U.S. and other countries, including legislation enacted in the European Union and other foreign jurisdictions that have placed greater restrictions on the use of lead, among other chemicals, in electronic products, which
affects materials composition and semiconductor packaging. These laws are becoming more stringent and may in the future cause us to incur material expenditures or otherwise cause financial harm.
We market and sell our products both inside and outside the U.S. Certain products are subject to the Export Administration Regulations, administered by the U.S. Department of Commerce, Bureau of Industry and Security (“BIS”), which require that we obtain an export license before we can export certain controlled products or technology to specified countries. Additionally, some of our products are subject to the International Traffic in Arms Regulations, which restrict the export of information and material that may be used for military or intelligence applications by a foreign person. Similar controls exist in other jurisdictions. Failure to comply with these laws could result in sanctions by the government, including substantial monetary penalties, denial of export privileges and debarment from government contracts. We maintain an export compliance program staffed by dedicated personnel under which we screen export transactions against current lists of restricted exports, destinations and end users with the objective of managing export-related decisions, transactions and shipping logistics to ensure compliance with these requirements.
Employees. As of October 1, 2021, we employed approximately 1,100 individuals worldwide, including approximately 380 in research and development. We have employees across 17 countries, with 71% in North America, 20% in Asia Pacific and 9% in Europe. None of our domestic employees are represented by a collective bargaining agreement; however, as of October 1, 2021, approximately 20 of our employees working in certain European locations were covered by collective bargaining agreements. We consider our relations with employees to generally be good and we have not experienced a work stoppage due to labor issues.
Approximately 70% and 30% of our workforce is male and female, respectively. Females represented approximately 10% of our senior management and approximately 15% of our engineering roles.
Corporate Culture and Employee Engagement. We are committed to fostering a corporate culture that encourages and seeks the betterment of the Company and the communities in which we conduct business. Through our charitable giving program, we donate up to 5,000 volunteer hours to the communities in which we operate, by allowing each employee to volunteer up to eight hours per year during working hours on approved charitable activities. Additionally, our employees engage directly with the community, volunteering their time to a number of organizations. We strive to foster a sense of community and well-being that encourages our employees to focus on both their and the Company’s long-term success. We realize that continuous engagement with our employees in a transparent, collaborative manner that builds trust and fosters thoughtful discussion is vital to driving successful outcomes. Executive management regularly conducts town hall-style meetings with employees to address business operations, strategy, market conditions and other topics. This format encourages open dialogue and provides employees with an opportunity to ask questions and voice opinions and ideas.
Retention and Development. We devote substantial efforts to retaining, motivating and supporting our employees, including by providing tuition and professional development reimbursement and opportunities for internal growth and advancement. Performance reviews are conducted at least annually for all employees, during which employees and managers address goals, development opportunities, strengths and areas for improvement. We have also maintained an internship program that supports the professional development of interns and serves as a recruitment tool for full-time employees. We monitor voluntary attrition as an indicator of employee engagement. During fiscal year 2021, our voluntary attrition rate was approximately 9%.
Compensation. Our compensation policies recognize and reward individual and collective contributions to our growth and success. We offer, among other things, competitive and balanced compensation programs commensurate with those of our peers and competitors. This includes, but is not limited to, well-rounded healthcare, prescription drug and disability insurance benefits for our employees and their families, a 401(k) plan for our U.S.-based employees and equivalent retirement savings programs for our non-U.S.-based employees with a matching contribution by the Company, an employee stock purchase plan in certain jurisdictions, corporate bonus and equity incentive programs, competitive paid time-off benefits, a parental leave program following the birth, adoption or fostering of a child and an employee assistance plan that provides professional support, access to special programs and certain resources to our employees experiencing personal, work, financial or family-related issues.
Diversity, Equity and Inclusion (DE&I). We have a diverse employee base, serving a wide variety of customers across multiple geographies. We are strengthened by the broad diversity of our employees’ perspectives, backgrounds, cultures, lifestyles and experiences.
We continue to create a culture of DE&I in the workplace in order to promote and effect change at the corporate and community levels. We support establishing a work environment where everyone has equal opportunities to learn and grow. Our DE&I efforts are guided by the following principles:
•Diversity is the representation of different people in an organization.
•Equity is ensuring that everyone has fair, just and equal opportunities at work.
•Inclusion is ensuring that everyone has an equal opportunity to contribute to and influence every part and level of a workplace.
•Belonging is ensuring that everyone feels safe and welcome at work.
We regularly use our employee newsletter and communications meetings to share information, opportunities and updates with our workforce on our DE&I and other initiatives. We are committed to providing equal opportunity in all aspects of employment and do not tolerate discrimination or harassment of any kind. We maintain a policy against unlawful discrimination, harassment and retaliation which sets forth our position on the prohibition of all forms of discrimination and harassment in the workplace.
Safety, Health and Well-being. Providing our employees with a healthy and safe working environment is essential. Our goal is to reduce the potential for injury or illness by maintaining safe working conditions, such as providing proper tools and training to all employees. Additionally, we offer resources to our employees to encourage healthy habits, such as health coaches, wellness incentives and a diabetes prevention program.
As a global organization, we are committed to following local government guidance related to COVID-19 in every jurisdiction where we operate, including adherence to requirements for temporary site closures. We have focused on and continue to focus on ensuring the health and safety of our global workforce during the COVID-19 global pandemic, including, among other things, by facilitating, and for certain locations, requiring certain employees to work from home, directing social distancing and implementing extensive health screening and sanitation policies at our facilities to ensure the safety of all essential employees. As part of our COVID-19 response plan, we implemented onsite health screening, Company-funded COVID-19 testing and onsite COVID-19 vaccination in our Lowell, Massachusetts headquarters. We also supported our workforce with advice and guidance on protecting their own health and the health of their families. We will continue to prioritize the health and safety of our employees during the remainder of the COVID-19 pandemic and thereafter.
History and Recent Developments
We were incorporated under the laws of the State of Delaware in March 2009. Our operations are conducted through our various subsidiaries, which are organized and operated according to the laws of their respective jurisdictions of incorporation.
MACOM Technology Solutions Inc., our primary operating subsidiary, which provides high-performance analog semiconductor solutions for use in wireless and wireline applications across the RF, microwave, millimeter wave and lightwave spectrum, was incorporated under the laws of the state of Delaware on July 16, 2008. MACOM Technology Solutions Limited, our primary foreign operating subsidiary, was incorporated under the laws of Ireland on November 18, 2008. The heritage of some of our business operations dates back over 70 years to the founding of Microwave Associates, Inc. and the MACOM brand dates back over 30 years.
We completed several acquisitions and divestitures during fiscal years 2017 and 2018 to attempt to further align our businesses to our primary markets. Those transactions include:
In January 2017, we acquired Applied Micro Circuits Corporation (“AppliedMicro”), a global provider of silicon solutions for next-generation cloud infrastructure and Cloud Data Centers, as well as connectivity products for edge, metro and long-haul communications equipment (the “AppliedMicro Acquisition”) in order to expand our business in enterprise and Cloud Data Center applications.
In October 2017, following the acquisition of AppliedMicro, we divested AppliedMicro's Compute business (the “Compute business”) and received an equity interest in Ampere Computing Holdings LLC (“Ampere”).
In August 2017, we completed the acquisition of Picometrix LLC in order to further expand our design center capabilities and expand our business in enterprise and Cloud Data Center applications.
In May 2018, we divested our long-range optical subassembly product line that we had acquired through our December 2015 acquisition of FiBest Limited (“LR4 business”). The LR4 business did not meet our expectations for profitable growth.
Our acquisition strategy is intended to accelerate our growth, expand our technology portfolio, grow our addressable market and create stockholder value.
During the fiscal quarter ended June 28, 2019, we committed to a plan designed to strategically realign, streamline and improve certain of our business and operations, including reducing our workforce by approximately 250 employees, exiting six development facilities in France, Japan, the Netherlands, Florida, Massachusetts and Rhode Island, reducing certain development activities for one of our product lines and no longer investing in the design and development of optical modules and subsystems for Data Center applications (the “2019 Plan”). These restructuring actions were completed in fiscal year 2020.
COVID-19 has spread throughout areas of the world where we operate and resulted in authorities implementing numerous measures to try to contain the virus. As a result of these measures and the spread of COVID-19, we have modified our business practices and may further modify our practices as required, or as we determine appropriate. While these measures, as well as other
disruptions, have impacted our operations, the operations of our customers and those of our respective vendors and suppliers, such impacts did not, through the fiscal year ended October 1, 2021, have a material impact on our consolidated operating results.
Given the significant continued economic uncertainty and volatility created by the pandemic, it is difficult to predict the nature and extent of impacts on the demand for our products. The continued spread of COVID-19 could cause a further economic slowdown or recession and could result in adverse impacts to our overall business, such as increased credit and collectability risks, adverse impacts on our supply chain, asset impairments, declines in the value of our financial instruments and adverse impacts on our capital resources. The degree to which the COVID-19 pandemic impacts our future business, financial condition, results of operations, liquidity and cash flows will depend on future developments, which are highly uncertain and cannot be accurately predicted, including the duration and spread of the outbreak, its severity, any resurgence of COVID-19 cases, including as a result of variant strains of the underlying virus, actions taken to contain the virus or treat its impact, the availability and efficacy of vaccines against COVID-19, how quickly and to what extent normal operating conditions can resume, and the economic impact on local, regional, national and international markets.
For additional information on risk factors that could impact our future results, please refer to “Item 1A - Risk Factors” in this Annual Report.
We maintain a website at www.macom.com, including an investors section, at which we routinely post important information, such as webcasts of quarterly earnings calls and other investor events in which we participate or host, and any related materials. We encourage investors to monitor our website, in addition to following our press releases, SEC filings and public conference calls and webcasts, as well as our social media channels (MACOM’s LinkedIn, Facebook and YouTube pages and Twitter account (@MACOMtweets)). You may access our annual reports on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K and amendments to those reports, as well as other reports relating to us that are filed with or furnished to the SEC, free of charge in the investors section of our website as soon as reasonably practicable after such material is electronically filed with or furnished to the SEC. The SEC maintains a website that contains reports, proxy and information statements and other information regarding issuers that file electronically with the SEC at www.sec.gov. The contents of the websites mentioned above, as well as our LinkedIn, Facebook and YouTube pages and Twitter account, are not incorporated into and should not be considered a part of this report.
ITEM 1A. RISK FACTORS
Our business involves a high degree of risk. You should carefully consider the following risks and other information in this Annual Report in evaluating the Company and its common stock. If any of the following risks actually occurs, our business, financial condition or results of operations could suffer. The risks described below are not the only ones facing us. Additional risks not presently known to us or that we currently consider immaterial may also adversely affect our Company.
Risks Relating to General Business Conditions
Our revenue growth and gross margin are substantially dependent on our successful development and release of new products.
Maintaining or growing our revenue will depend, among other things, on our ability to timely develop products for existing and new markets that meet customers’ performance, reliability and price expectations. In addition, the average selling prices of our products may decrease over time and we must introduce new products that can be manufactured at lower costs or that command higher prices based on superior performance to offset this expected price erosion. If we are not able to introduce, in successive years, products that ship in volume, our revenue will likely not grow and may decline significantly and rapidly. The development of products is a highly complex process, and we have in the past and may in the future experience delays and failures in completing the development and introduction of new products. Our successful product development depends on a number of factors, including the accurate prediction of market requirements, changes in technology and evolving standards; the availability of qualified product designers and process technologies needed to solve design challenges in a cost-effective, reliable manner; our ability to design products that meet customers’ requirements; our ability to successfully design and manufacture products at competitive prices and volumes; our customers’ acceptance of our product designs; the acceptance of our customers’ products by the market and the lifecycle of such products; the strength of and ability to protect our intellectual property rights; our ability to obtain, on commercially reasonable terms, licenses to necessary third party intellectual property rights; and our ability to maintain and increase our level of product content in our customers’ systems.
A new product design effort may last over one year, and requires significant investment in engineering, as well as sales and marketing, which may not be recouped. Our failure to anticipate or timely develop new or enhanced products or technologies in response to technological shifts could result in decreased revenue and others obtaining design wins. As a result, our gross margin may decrease, we may not reach our expected level of production orders and we may lose market share, which could adversely affect our ability to sustain our revenue growth or maintain our current revenue levels.
Sources for certain components, materials and services are limited, which could result in interruptions, delays or reductions in product shipments.
Our industry may be affected from time to time by limited supplies of certain key components, materials and services. We have in the past and may in the future, experience delays or reductions in supply shipments, which could reduce our revenue and profitability. In particular, the COVID-19 pandemic has caused shortages of certain semiconductor components and delays in shipments. If key components, materials or services are unavailable, our costs could increase and our revenue could decline.
Our manufacturing headquarters, design facilities, assembly and test facilities and supply chain, and those of our contract manufacturers, are subject to risk of catastrophic loss due to fire, flood or other natural or man-made disasters. Any catastrophic loss or significant damage to any of these facilities, particularly our Lowell, Massachusetts headquarters, could materially disrupt our operations, delay production, shipments and revenue and result in significant expenses to repair or replace the facility and, in some instances, could significantly curtail our research and development efforts, and adversely affect our business and financial results, revenue and profitability.
We are subject to supply, order and shipment uncertainties. Our profitability will decline if we fail to accurately forecast customer demand when managing inventory.
We generally sell our products on the basis of purchase orders rather than long-term purchase commitments from our customers. Our customers can typically cancel purchase orders or defer product shipments for some period without incurring a liability to us. We typically plan production and inventory levels based on internal forecasts of customer demand, which can be highly unpredictable and can fluctuate substantially, leading to excess inventory write-downs and resulting negative impacts on gross margin and net income. We have limited visibility into our customers’ inventories, future customer demand and the product mix that our customers will require, which could adversely affect our production forecasts and operating margins. The difficulty in predicting demand may be compounded when we sell to OEM customers indirectly through distributors or contract manufacturers, as our forecasts of demand are then based on estimates provided by multiple parties. If we overestimate our customers’ requirements, we may have excess inventory, which could lead to obsolete inventory, write-downs and unexpected costs. Conversely, if we underestimate our customers’ requirements or are not able to secure components, materials and/or fabrication facility capacity, we may have inadequate inventory, which could lead to foregone revenue opportunities, loss of potential market share and damage to customer relationships. Furthermore, obtaining additional supply in the face of any component shortages may be costly or impossible, particularly in the short term, which could prevent us from fulfilling orders in a timely manner or at all. If our own supply chain or others from whom our customers source are unable to deliver required components to our customers, then our customers may delay or cancel their product orders from us. Any significant future cancellation or deferral of product orders could adversely affect our revenue and margins, increase inventory write-downs due to obsolete inventory or adversely affect our operating results and stock price.
Underutilization, price competition, acquisitions and various other factors may reduce our gross margin, which could negatively affect our business, financial condition and results of operations.
If we are unable to utilize our design, fabrication, assembly and test facilities at a high level, the significant fixed costs associated with these facilities may not be fully absorbed, resulting in higher than average unit costs and lower gross margin. Similarly, when we compete for business on the basis of our products’ unit price, the average selling price of our products is reduced, negatively affecting our gross margins. Increased sales of lower-margin products, increases in raw material costs, changes in manufacturing yields and other factors can reduce our gross margins from time to time, which could have an adverse impact on our business, financial condition and results of operations in the future. As a result of these or other factors, we may be unable to maintain or increase our gross margin in future periods and our gross margin may fluctuate from period to period.
Our operating results may fluctuate significantly from period to period. We may not meet investors’ quarterly or annual financial expectations and, as a result, our stock price may decline.
Our quarterly and annual operating results and related expectations may vary significantly in the future based upon a number of factors, many of which are beyond our control, including: general economic growth or decline in the U.S. or foreign markets; reduction or cancellation of orders by customers; the amount of new customer orders we book and ship in any particular fiscal quarter; relative linearity of our shipments within any particular fiscal quarter; the gain or loss of a key customer or significant changes in demand and/or fluctuations in the markets we serve; fluctuations in the levels of component inventories held by our customers and accurate forecasting by customers; fluctuations in manufacturing output, yields, capacity levels, quality control or other potential problems or delays we or our subcontractors may experience in the fabrication, assembly, testing or delivery of our products; success of our investments in research and development; availability, quality and cost of semiconductor wafers and other raw materials, equipment, components and internal or outsourced manufacturing, packaging and test capacity, particularly where we have only one qualified source of supply; effects of seasonal and other changes in customer demand; effects of competitive pricing pressures, including decreases in average selling prices of our products; loss of key personnel or the shortage of available skilled workers; our failure to remain abreast of new and improved semiconductor process technologies; failure of our partners in strategic alliances, which may prevent us from achieving commercial success in such alliance; the exposure of our operations to possible capital and exchange controls, expropriation and other restrictive government actions, changes in intellectual property legal protections and remedies, as well as political unrest, unstable governments and legal systems and inter-governmental disputes; changes in laws and regulations in
the U.S. and other countries, or the interpretations thereof; and the effects of war, natural disasters, global pandemics, acts of terrorism, macroeconomic uncertainty or decline or geopolitical unrest.
The foregoing factors are difficult to forecast. These and similar factors could materially and adversely affect our quarterly and annual operating results and related expectations for future periods. If our operating results in any period do not meet our publicly stated guidance or the expectations of investors or securities analysts, our stock price may decline and has, in the past, declined as a result.
If demand for our products in our primary markets declines or fails to grow, our revenue and profitability may suffer.
Our future growth depends on our ability to anticipate demand and respond to it with products that address our customers' needs. To a significant extent, this growth depends on the continued growth in usage of advanced electronic systems in our primary markets: Telecom, Data Center and I&D. The rate and extent to which these markets will grow, if at all, is uncertain. For example, we have focused significant internal resources to meet potential product demand in the Cloud Data Center Market, but our ability to capitalize on this and other market opportunities in 100G optical networks and GaN technology will depend on, among other things, the future size and actual growth rates of these markets, the next generation technologies selected by customers, the timing of network upgrades in these markets and the pace of adoption of our products in these markets. If demand for electronic systems that incorporate our products declines, fails to grow or grows more slowly than we anticipate, purchases of our products may be reduced, which will adversely affect our business, financial condition and results of operations.
The effects of the COVID-19 pandemic have materially impacted, and will likely further impact in the future, how we operate our business, and the extent to which this will impact our business, financial condition and results of operations remains uncertain.
COVID-19, the disease caused by the coronavirus identified in late 2019, has spread throughout areas of the world where we operate and resulted in authorities implementing numerous measures to try to contain the virus, such as travel bans and restrictions, quarantines, stay-at-home directives and lockdowns and business shutdowns. These measures, as well as transportation disruptions, including reduced availability of air transport, port closures and increased border controls, have impacted, and will likely further impact in the future, our operations, the operations of our customers and those of our respective vendors and suppliers. There is considerable uncertainty regarding the duration and effect of existing measures and potential future measures, and depending on the magnitude of the disruptions, our business, financial condition and results of operations may be materially and adversely affected.
The ongoing impact of the COVID-19 pandemic is fluid and uncertain, and it could adversely affect our customers’ ability or willingness to purchase our products, delay prospective customers’ purchasing decisions, negatively impact our supply chain, restrict our ability to provide certain products or delay the introduction of new product offerings. In addition, there are ongoing global impacts resulting from the pandemic, including shortages of semiconductor components and delays in shipments, which has impacted product production and delivery to customers. The spread of COVID-19 has caused us to modify our business practices, including restricting employee travel, canceling physical participation in meetings, events and conferences, requiring most employees to work from home and operating with a limited number of employees in certain locations, which could result in production delays and limit our ability to satisfy orders for certain products. We may take further actions as may be required by government authorities or that we determine are in the best interests of our employees, customers and suppliers. Moreover, the COVID-19 pandemic or any worsening of the global economic environment as a result thereof may have the effect of exacerbating other risks described elsewhere in this Part I, “Item 1A - Risk Factors.”
The degree to which the COVID-19 pandemic may impact our business, financial condition, results of operations, liquidity and cash flows will depend on future developments, which are highly uncertain and cannot be predicted, including the duration and spread of the outbreak, its severity, any resurgence of COVID-19 cases, including as a result of variant strains of the underlying virus, actions taken to contain the virus or treat its impact, the availability and efficacy of vaccines against COVID-19 and how quickly and to what extent normal operating conditions can resume. Furthermore, while the potential impacts of the COVID-19 pandemic may be difficult to assess or predict, it has resulted in a significant disruption of global financial markets, and any resulting recession or long-term market correction could materially impact the value of our common stock, and could result in adverse impacts such as increased credit and collectibility risks, adverse impacts on our suppliers, asset impairments, declines in the value of our financial instruments and adverse impacts on our capital resources. There are no comparable recent events that provide guidance as to the effect the COVID-19 pandemic may have, and, as a result, the ultimate impact of the outbreak on our business, financial condition and results of operations is highly uncertain and subject to change.
We depend on orders from a limited number of customers for a significant percentage of our revenue.
In the fiscal year ended October 1, 2021, no direct customer individually accounted for 10% or more of our revenue and sales to our top 10 direct and distribution customers accounted for an aggregate of 48.9% of our revenue. While the composition of our top 10 customers varies from year to year, we expect that sales to a limited number of customers will continue to account for a significant percentage of our revenue for the foreseeable future. The purchasing arrangements with our customers are typically conducted on a purchase order basis that does not require our customers to purchase any minimum amount of our products over a period of time. As a result, it is possible that any of our major customers could terminate their purchasing arrangements with us with little or no warning and without penalty, or significantly reduce or delay the amount of our products that they order, purchase products from our
competitors or develop their own products internally. The loss of, or a reduction in, orders from any major customer may cause a material decline in revenue and adversely affect our results of operations.
We may incur significant risk and expense in attempting to win new business and such efforts may never generate revenue.
To obtain new business, we often need to win a competitive selection process to develop semiconductors for use in our customers’ systems, known in the industry as a “design win.” Failure to obtain a design win can result in lost or foregone revenue and could weaken our position in future competitive selection processes or cause us to fail to meet revenue projections or expectations.
Even when we achieve a design win, success is not guaranteed. Customer qualification and design cycles can be lengthy, and it may take a year or more following a successful design win and product qualification for one of our products to be purchased in volume by the customer. Furthermore, any difficulties our customer may experience in completing its own qualifications may delay or prevent us from translating the design win into revenue. Any of these events or any cancellation of a customer’s program or failure of our customer to market its own product successfully after our design win, could materially and adversely affect our business, financial condition and results of operations, as we may have incurred significant expense and generated no revenue.
We operate in the semiconductor industry, which is cyclical and subject to significant downturns.
The semiconductor industry is highly cyclical and is characterized by constant and rapid technological change, price erosion, product obsolescence, evolving standards, short product lifecycles and significant fluctuations in supply and demand. The industry has historically experienced significant fluctuations in demand and product obsolescence, resulting in product overcapacity, high inventory levels and accelerated erosion of average selling prices. Downturns in this industry may be prolonged, and downturns in many sectors of the electronic systems industry have in the past contributed to extended periods of weak demand for semiconductor products. We have experienced decreases in our revenue, profitability, cash flows and stock price during such downturns in the past, and may be similarly harmed by future downturns, particularly if we are unable to effectively respond to reduced demand in a particular market.
Our business may be adversely affected if we experience product returns, product liability and defects claims.
Our products are complex and frequently operate in high-performance, challenging environments. We may not be able to anticipate all of the possible performance or reliability problems that could arise with our products after they are released to the market. If such problems occur or become significant, we may experience reduced revenue and increased costs related to product recalls, inventory write-offs, warranty or damage claims, delays in, cancellations of or returns of product orders and other expenses. Certain of our distributors have inventory return and or rotation rights, which may result in higher than expected product returns. The many materials and vendors used in the manufacture of our products increase the risk that some defects may escape detection in our manufacturing process and subsequently affect our customers, even in the case of long-standing product designs. Our use of newly-developed or less mature semiconductor process technologies, such as GaN and InP, which have a less extensive track record of reliability in the field than other more mature process technologies, also increases the risk of performance and reliability problems. These matters have arisen in our operations from time to time in the past, have resulted in significant expense to us per occurrence and will likely occur again in the future. The occurrence of defects could result in product returns and liability claims, reduced product shipments, damage to our customer or supplier relationships, the loss of or delay in market acceptance of our products, costly litigation, harm to our reputation, diversion of management’s time and resources, lower revenue, increased expenses and reduced profitability. Any warranty or other rights we may have against our suppliers for quality issues caused by them may be more limited than those our customers have against us, based on our relative size, bargaining power or otherwise. In addition, any product recall or product liability claim brought against us, particularly in high-volume consumer markets, could have a material negative impact on our reputation, business, financial condition or results of operations.
Our business and operations could suffer in the event of a security breach, cybersecurity incident or disruption of our information technology systems.
We rely on our information technology systems for the effective operation of our business and for the secure maintenance and storage of confidential data relating to our business. Although our internal information technology team actively takes steps to protect our information security systems, experienced programmers or hackers may be able to penetrate our security controls, and develop and deploy viruses, worms and other malicious software programs that compromise our confidential information or that of third parties and cause a disruption or failure of our information technology systems. In addition, we have in the past and may in the future be subject to “phishing” attacks in which third parties send emails purporting to be from reputable companies to obtain personal information and infiltrate our systems to initiate wire transfers or otherwise obtain proprietary or confidential information. A number of large, public companies have recently experienced losses based on ransomware and/or phishing attacks and other cyber-attacks. Any compromise of our information technology systems could result in unauthorized publication of our confidential business or proprietary information, result in the unauthorized release of customer, supplier or employee data, result in violations of privacy or other laws, expose us to a risk of litigation, cause us to incur direct losses if attackers access our bank or investment accounts, or damage our reputation. The cost and operational consequences of implementing data protection measures either as a response to specific breaches or as a result of evolving risks could be significant. In addition, our inability to use or access our information systems at critical points in time could adversely affect the timely and efficient operation of our business. Any delayed sales, significant costs or lost customers resulting from a technology failure could adversely affect our business, operations and financial results.
Third parties with which we conduct business, such as foundries, assembly and test contractors, and distributors, have access to certain portions of our sensitive data. In the event that these third parties do not properly safeguard our data that they hold, security breaches could result and negatively impact our business, operations and financial results.
The outcome of any litigation in which we are involved in is unpredictable and an adverse decision in any such matter could subject us to damage awards and lower the market price of our stock.
From time to time we may be a party to certain litigation matters. Any such disputes, litigations, investigations, administrative proceedings or enforcement actions may divert financial and management resources that would otherwise be used to benefit our operations, result in negative publicity and harm our customer or supplier relationships. An adverse resolution of any such matter in the future, including the results of any amicable settlement, could subject us to material damage awards or settlement payments, loss of contractual or other rights, injunctions or other limitations on the operation of our business or other material harm to our business.
Our term loan and revolving credit facility could result in outstanding debt with a claim to our assets that is senior to that of our stockholders and may have other adverse effects on our results of operations.
As of October 1, 2021, we had a credit facility consisting of a term loan facility with an outstanding principle balance of $120.8 million and a revolving credit facility with $160.0 million of available borrowing capacity. The facility is secured by a first priority lien on our assets and those of our domestic subsidiaries. The amount of our indebtedness could have important consequences, including that we may be unable or limited in our ability to obtain additional financing on favorable terms in the future for working capital, capital expenditures, acquisitions, general corporate or other purposes; we may be limited in our ability to make distributions to our stockholders in a sale or liquidation until our debt is repaid in full; we may be more vulnerable to economic downturns, less able to withstand competitive pressures and less flexible in responding to changing business and economic conditions; and we cannot assure you that our business will generate sufficient cash flow from operations or other sources to enable us to meet our payment obligations under the facility and to fund other liquidity needs.
Our credit facility also contains certain restrictive covenants that may limit or eliminate our ability to, among other things, incur additional debt, sell, lease or transfer our assets, pay dividends, make investments and loans, make acquisitions, guarantee debt or obligations, create liens, enter into transactions with our affiliates, enter into new lines of business and enter into certain merger, consolidation or other reorganizations transactions, any of which could place us at a competitive disadvantage relative to our competitors that are not subject to such restrictions. If we are unable to repay the indebtedness, the lenders could initiate a bankruptcy proceeding against us or collection proceedings with respect to our subsidiaries securing the facility, which could materially decrease the value of our common stock.
We rely on third parties to provide corporate infrastructure services necessary for the operation of our business. Any failure of one or more of our vendors to provide these services could have a material adverse effect on our business.
We rely on third-party vendors to provide critical corporate infrastructure services, including, among other things, certain services related to information technology and network development and monitoring. We depend on these vendors to ensure that our corporate infrastructure will consistently meet our business requirements. The ability of these third-party vendors to successfully provide reliable, high quality services is subject to technical and operational uncertainties that are beyond our control. Any failure of our corporate infrastructure could have a material adverse effect on our business, financial condition and results of operations.
Variability in self-insurance liability estimates could adversely impact our results of operations.
We self-insure for employee health insurance and workers’ compensation insurance coverage up to a predetermined level, beyond which we maintain stop-loss insurance from a third-party insurer. Our aggregate exposure varies from year to year based upon the number of participants in our insurance plans. We estimate our self-insurance liabilities using an analysis provided by our claims administrator and our historical claims experience. Our accruals for insurance reserves reflect these estimates and other management judgments, which are subject to a high degree of variability. If the number or severity of claims for which we self-insure increases, it could cause a material and adverse change to our reserves for self-insurance liabilities, as well as to our earnings.
Risks Relating to International Operations
We are subject to risks from our international sales and operations.
We have operations in Europe and Asia, and customers around the world. As a result, we are subject to regulatory, geopolitical and other risks associated with doing business outside of the U.S., including currency controls, currency exchange rate fluctuations, new or potential international trade agreements, tariffs, required import and export licenses, and other related international trade restrictions and regulations. Further, there is a risk that language barriers, cultural differences and other factors associated with our global operations may make them more difficult to manage effectively.
The legal system in many of the regions where we conduct business can lack transparency in certain respects relative to that of the U.S. and can accord local government authorities a higher degree of control and discretion over business than is customary in the U.S. This makes the process of obtaining necessary regulatory approvals and maintaining compliance inherently more difficult and unpredictable. In addition, the protection accorded to proprietary technology and know-how under certain legal systems may not be as
strong as in the U.S., and, as a result, we may lose valuable trade secrets and competitive advantages. The cost of doing business in European jurisdictions can also be higher than in the U.S. due to exchange rates, local collective bargaining regimes and local legal requirements and norms regarding employee benefits and employer-employee relations, in particular. We are also subject to U.S. legal requirements related to our foreign operations, including the Foreign Corrupt Practices Act.
Sales to customers located outside the U.S. accounted for 54.2% of our revenue for the fiscal year ended October 1, 2021. Sales to customers located in China and the Asia Pacific region typically account for a substantial majority of our overall sales to customers located outside the U.S. We expect that revenue from international sales generally, and sales to China and the Asia Pacific region specifically, will continue to be a material part of our total revenue. Therefore, any financial crisis, trade war or dispute, domestic semiconductor supply chain initiatives, health crisis or other major event causing business disruption in international jurisdictions generally, and China and the Asia Pacific region in particular, could negatively affect our future revenues and results of operations. For example, in May 2019, the BIS added Huawei Technologies Co. Ltd. (“Huawei”) and many of its affiliates to its Entity List (and subsequently added additional Huawei affiliates), which effectively blocks exports of U.S. products to Huawei and such affiliates. Such actions in the future, as well as other changes in Chinese laws and regulations, including actions in furtherance of China’s stated policy of reducing its dependence on foreign semiconductor manufacturers, could increase the cost of doing business in China, foster the emergence of additional Chinese-based competitors and/or decrease the demand for our products in China, which could have a material adverse effect on our business and results of operations.
Because the majority of our foreign sales are denominated in U.S. dollars, our products become less price-competitive in countries with currencies that are low or are declining in value against the U.S. dollar. Also, we cannot be sure that our international customers will continue to accept orders denominated in U.S. dollars. If they do not, our reported revenue and earnings will become more directly subject to foreign exchange fluctuations. Some of our customer purchase orders and agreements are governed by foreign laws, which may differ significantly from U.S. laws. As a result, we may be limited in our ability to enforce our rights under such agreements and to collect amounts owed to us.
The majority of our assembly, packaging and test vendors are located in Asia. We generally do business with our foreign assemblers in U.S. dollars. Our manufacturing costs could increase in countries with currencies that are increasing in value against the U.S. dollar. Also, our international manufacturing suppliers may not continue to accept orders denominated in U.S. dollars. If they do not, our costs will become more directly subject to foreign exchange fluctuations. From time to time, we may attempt to hedge our exposure to foreign currency risk by buying currency contracts or otherwise, and any such efforts involve expense and associated risk that the currencies involved may not behave as we expect and we may lose money on such hedging strategies or not properly hedge our risk.
In addition, if terrorist activity, armed conflict, civil, economic or military unrest, natural disasters, global pandemics, embargoes or other economic sanctions, enforcement actions against governments, governmental entities or private entities or political instability occurs in the U.S. or other locations, such events may disrupt our manufacturing, assembly, logistics, security and communications, labor issues and transportation and other disruptions, and could also result in reduced demand for our products. We have in the past and, may again in the future, experience difficulties relating to employees traveling in and out of countries facing civil unrest or political instability and with obtaining travel visas for our employees. There can be no assurance that we can mitigate all identified risks with reasonable effort. The occurrence of any of these events could have a material adverse effect on our operating results.
Risks Relating to Production Operations
Our internal and external manufacturing, assembly and test model subjects us to various manufacturing and supply risks.
We operate a leased semiconductor wafer processing and manufacturing facility at our headquarters in Lowell, Massachusetts, and at our Ann Arbor, Michigan site. These facilities are also important internal design, assembly and test facilities. We maintain other internal assembly and test operation facilities as well, including leased sites in Nashua, New Hampshire, and Hsinchu, Taiwan. We also use multiple external foundries for outsourced semiconductor wafer supply, as well as multiple domestic and Asian assembly and test suppliers to assemble and test our products. A number of factors will affect the future success of these internal manufacturing facilities and outsourced supply and service arrangements, including the level of demand for our products; our ability to expand and contract our facilities and purchase commitments in a timely and cost-effective manner; our ability to generate revenue in amounts that cover the significant fixed costs of operating our facilities; our ability to qualify our facilities for new products and process technologies in a timely manner and avoid complications; the availability of raw materials; the availability and continued operation of key equipment; our manufacturing cycle times and yields; political and economic risks; the occurrence of natural disasters, pandemics, acts of terrorism, armed conflicts or unrest impacting our facilities and those of our outsourced suppliers; our ability to hire, train, manage and retain qualified production personnel; our compliance with applicable environmental and other laws and regulations; our ability to avoid prolonged periods of downtime or high levels of scrap in our and our suppliers’ facilities for any reason; and our ability to negotiate renewals to our existing lease agreements on favorable terms and without disruption to our wafer processing and manufacturing and internal assembly and test operations at our sites where such activities take place. The effectiveness of our supply chain could be adversely affected by such issues and harm our results of operations.
Minor deviations in the manufacturing process can cause substantial manufacturing yield loss or even cause halts in production, which could have a material adverse effect on our revenue and gross margin.
Our products involve complexities in both their design and the semiconductor process technology employed in their fabrication. In many cases, the products are also assembled in customized packages or feature high levels of integration. Our products must meet exacting customer specifications for quality, performance and reliability.
Our manufacturing yield, or the percentage of units of a given product in a given period that is usable relative to all such units produced, is a combination of yields including wafer fabrication, assembly and test yields. Due to the complexity of our products, we periodically experience difficulties in achieving acceptable yields as even minor deviations in the manufacturing process can cause substantial manufacturing yield loss or halt production. Our customers may also test our components once they have been assembled into their products. The number of usable products that result from our production process can fluctuate as a result of many factors, including design errors; defects in photomasks, used to print circuits on wafers; minute impurities in materials used; contamination of the manufacturing environment; equipment failure or variations in the manufacturing processes; losses from broken wafers or other human errors; defects in packaging; and issues and errors in testing. Typically, for a given level of sales, when our yields improve, our gross margin improves. Conversely, when our yields decrease, our unit costs are typically higher, our gross margin is lower and our profitability is adversely affected, any or all of which can harm our results of operations and lower our stock price.
Our business may be harmed if systems manufacturers choose not to use components made of the compound semiconductor materials we utilize.
Silicon semiconductor technologies are the dominant process technologies for the manufacture of ICs in high-volume, commercial markets and the performance of silicon ICs continues to improve. While we use silicon for some applications, we also often use compound semiconductor technologies such as GaAs, InP, SiGe or GaN to deliver reliable operation at higher power, higher frequency or smaller form factor than a silicon solution has historically allowed. While these compound semiconductor materials offer high-performance features, it is generally more difficult to design and manufacture products with reliability and in volume using them. Compound semiconductor technology tends to be more expensive than silicon technology. System designers in some markets may be reluctant to adopt our non-silicon products or may be likely to adopt silicon products in lieu of our products if silicon products meeting their demanding performance requirements are available, because of their unfamiliarity with designing systems using our products; concerns related to manufacturing costs and yields; unfamiliarity with our design and manufacturing processes; or uncertainties about the relative cost effectiveness of our products. We cannot be certain that additional systems manufacturers will design our compound semiconductor products into their systems or that the companies that have utilized our products will continue to do so in the future. If our products fail to achieve or maintain market acceptance for any of the above reasons, our results of operations will suffer.
We face risks associated with government contracting.
Some of our revenue is derived from contracts with agencies of the U.S. government or subcontracts with its prime contractors. As a U.S. government contractor or subcontractor, we may be subject to federal contracting regulations, including the Federal Acquisition Regulations, which govern, among other things, the allowability of costs incurred by us in the performance of U.S. government contracts. Certain contract pricing is based on estimated direct and indirect costs, which are subject to change. Additionally, the U.S. government is entitled after final payment on certain negotiated contracts to examine all of our cost records with respect to such contracts and to seek a downward adjustment to the price of the contract if it determines that we failed to furnish complete, accurate and current cost or pricing data in connection with the negotiation of the price of the contract. In connection with our U.S. government business, we may also be subject to government audits and to review and approval of our policies, procedures and internal controls for compliance with procurement regulations and applicable laws. In certain circumstances, if we do not comply with the terms of a contract or with regulations or statutes, we could be subject to downward contract price adjustments or refund obligations or could in extreme circumstances be assessed civil and criminal penalties or be debarred or suspended from obtaining future contracts for a specified period of time. Any such suspension or debarment or other sanction could have an adverse effect on our business. In addition, if we are unable to comply with security clearance requirements, we might be unable to perform these contracts or compete for other projects of this nature, which could adversely affect our revenue.
Risks Relating to Research and Development, Intellectual Property and New Technologies
Our investment in technology as well as research and development may not be successful, which may impact our profitability.
The semiconductor industry requires substantial investment in technology as well as research and development in order to bring to market new and enhanced technologies and products. Our research and development expenses were $138.8 million for the fiscal year ended October 1, 2021. In each of the last three fiscal years, we invested in research and development as part of our strategy toward the development of innovative products and solutions to help support our growth and profitability. We cannot assure you if, or when, the products and solutions where we have focused our research and development expenditures will become commercially successful. In addition, we may not have sufficient resources to maintain the level of investment in research and development required to remain competitive or succeed in our strategy. Our efforts to develop new and improved process technologies for use in our products require substantial expenditures that may generate an inadequate return on investment, if any, or may take longer than we anticipate to generate a return. For example, we have in the past and may continue to experience additional and new unexpected
difficulties, expenses or delays in qualifying and completing certain of our development projects including our GaN-on-Silicon, Silicon Photonics, certain Laser products and our AFRL related process technology transfer. These development risks may be associated with internal MACOM capabilities and/or external factors, which may include, but not limited to, matters with one or more third party foundries, assembly and test suppliers, qualifying related products with our customers and marketing efforts, and we may not be successful in process or product qualification and/or manufacturing cost reductions. In addition, we may not realize the competitive advantage we anticipate from related investments and may not realize customer demand for this technology that meets our expectations, any of which could lead to higher than expected operating expense, lower than expected revenue and gross margin, associated charges or otherwise reduce the price of our common stock. We may not be successful in our research and development efforts or may not realize the competitive advantages, revenues or profits we anticipate from new products, any of which may lead to higher research and development expense, lower than expected revenues and gross margin and reduced profitability, or may otherwise harm our business or reduce the price of our common stock. Such results, or anticipated results, may cause us to reevaluate our investment in those areas of our business.
We may incur liabilities for claims of intellectual property infringement relating to our products.
The semiconductor industry is generally subject to frequent litigation regarding patents and other intellectual property rights. In the past we have been, and may in the future be, subject to claims that we have breached, infringed or misappropriated patent, license or other intellectual property rights. Our customers may assert claims against us for indemnification if they receive claims alleging that their or our products infringe upon others’ intellectual property rights, and have in the past and may in the future choose not to purchase our products based on their concerns over such a pending claim. In the event of an adverse result of any intellectual property rights litigation, we could be required to incur significant costs to defend or settle such litigation, pay substantial damages for infringement, expend significant resources to develop non-infringing technology, incur material liability for royalty payments or fees to obtain licenses to the technology covered by the litigation or be subjected to an injunction, which could prevent us from selling our products, and materially and adversely affect our revenue and results of operations. Any claims relating to the infringement of third-party proprietary rights, even if not meritorious, could result in costly litigation, lost sales or damaged customer relationships and diversion of management’s attention and resources.
Certain of our products currently incorporate technology licensed or acquired from third parties and we expect our products in the future to also require technology from third parties. If the licenses to such technology that we currently hold become unavailable or the terms on which they are available become commercially unreasonable, or if we are unable to acquire or license necessary technology for our products in the future, our business could be adversely affected.
We sell products in markets that are characterized by rapid technological changes, evolving industry standards, frequent new product introductions and increasing levels of integration. Our ability to keep pace with these markets at times depends on our ability to obtain technology from third parties on commercially reasonable terms to allow our products to remain competitive. If licenses to such technology are not available on commercially reasonable terms and conditions or at all and we cannot otherwise acquire or integrate such technology, our products or our customers’ products could become unmarketable or obsolete, we could lose market share and our revenue and results of operations could materially decline. In addition, disputes with third party licensors over required payments, scope of licensed rights and compliance with contractual terms are common in our industry and we have in the past and may in the future be subjected to disputes over the terms of such licenses which could result in substantial unanticipated costs or delays in developing substitute technology to deliver competitive products, damaged customer and vendor relationships, indemnification liabilities and declining revenues and profitability. Such events could have an adverse effect on our financial condition and results of operations.
We depend on third parties for products and services required for our business, which may limit our ability to meet customer demand, assure product quality and control costs.
We purchase numerous raw materials, such as ceramic packages, precious metals, semiconductor wafers and ICs, from a limited number of external suppliers. We also currently use several external manufacturing suppliers for assembly and testing of our products, and in some cases for fully-outsourced turnkey manufacturing of our products. We expect to increase our use of outsourced manufacturing in the future as a strategy. The use of external suppliers involves a number of risks, including the possibility of material disruptions in the supply of key components, the lack of control over delivery schedules, capacity constraints, manufacturing yields, quality and fabrication costs and misappropriation of our intellectual property. If these vendors’ processes vary in reliability or quality, they could negatively affect our products and, therefore, our customer relations and results of operations. We generally purchase raw materials on a purchase order basis and we do not have significant long-term supply commitments from our vendors. The long-term supply commitments we have may result in an obligation to purchase excess material, which may materially and negatively impact our operating results. In terms of relative bargaining power, many of our suppliers are larger than we are, with greater resources, and many of their other customers are larger and have greater resources than we do. These vendors may choose to supply others in preference to us in times of capacity constraint or otherwise, particularly where the other customers purchase in higher volume. Third-party supplier capacity constraints have in the past and may in the future prevent us from supplying customer demand that we otherwise could have fulfilled at attractive prices. If we have a firm commitment to supply our customers but are unable to do so we may be liable for resulting damages and expense incurred by our customers.
We utilize sole source suppliers for certain semiconductor packages and other materials and, in some cases, for the particular semiconductor fabrication process technologies manufactured at that supplier’s facility. Such supplier concentrations involve the risk of a potential future business interruption if the supplier becomes unable or unwilling to supply us at any point. While in some cases alternate suppliers may exist, because there are limited numbers of third-party wafer suppliers that use the process technologies we select for our products and that have sufficient capacity to meet our needs, it may not be possible or may be expensive to find an alternative source of supply. Even if we are able to find an alternative source, moving production to an alternative supplier requires an extensive qualification or re-qualification process that could prevent or delay product shipments or disrupt customers’ production schedules, which could harm our business. The loss of a supplier can also significantly harm our business and operating results.
Our limited ability to protect our proprietary information and technology may adversely affect our ability to compete.
Our future success and ability to compete is dependent in part upon our protection of our proprietary information and technology through patent filings, enforcement of agreements related to intellectual property and otherwise. We cannot be certain that any patents we apply for will be issued or that any claims allowed from pending applications will be of sufficient scope or strength to provide meaningful protection or commercial advantage. Our competitors may also be able to design around our patents. Similarly, counterparties to our intellectual property agreements may fail to comply with their obligations under those agreements, requiring us to resort to expensive and time-consuming litigation in an attempt to protect our rights, which may or may not be successful. The laws of some countries in which our products are or may be developed, manufactured or sold, may not protect our products or intellectual property rights to the same extent as U.S. laws. Although we intend to vigorously defend our intellectual property rights, we may not be able to prevent misappropriation of our technology or may need to expend significant financial and other resources in defending our rights.
In addition, we rely on trade secrets, technical know-how and other unpatented proprietary information relating to our product development and manufacturing activities. While we enter into confidentiality agreements with employees and other parties to protect this information, we cannot be sure that these agreements will be adequate and will not be breached, that we would have adequate remedies for any breach or that our trade secrets and proprietary know-how will not otherwise become known or independently discovered by others.
Additionally, our competitors may independently develop technologies that are substantially equivalent or superior to our technology. Despite our efforts to protect our proprietary rights, unauthorized parties may attempt to copy or otherwise obtain or use our products or technology. Patent litigation is expensive and our ability to enforce our patents and other intellectual property, is limited by our financial resources and is subject to general litigation risks. If we seek to enforce our rights, we may be subject to claims that the intellectual property rights are invalid, are otherwise not enforceable or are licensed to the party against whom we assert a claim. In addition, our assertion of intellectual property rights could result in the other party seeking to assert alleged intellectual property rights of its own against us, which is a frequent occurrence in such litigations.
Risks Relating to Government Regulations
Changes in U.S. and international laws, accounting standards, export and import controls and trade policies or the enforcement of, or attempt to enforce, such laws, standards, controls and policies may adversely impact our business and operating results.
Our future results could be adversely affected by changes in interpretations of existing laws and regulations, or changes in laws and regulations, including, among others, changes in accounting standards, taxation requirements, competition laws, trade laws, import and export restrictions, privacy laws and environmental laws in the U.S. and other countries. The U.S. government has made statements and taken certain actions that have led to, and may lead to further, changes to U.S. and international export and import controls or trade policies, including tariffs affecting certain products exported by a number of U.S. trading partners, including China. In response, many of those trading partners, including China, have imposed or proposed new or higher tariffs on American products. It is unknown whether and to what extent new tariffs (or other new laws or regulations) will be adopted, or the effect that any such actions would have on us or our industry and customers. Any unfavorable government policies on international trade, such as export and import controls, capital controls or tariffs, may affect the demand for our products and services, increase the cost of components, delay production, impact the competitive position of our products or prevent us from being able to sell products in certain countries. If any new export or import controls, tariffs, legislation or regulations are implemented or if existing trade agreements are renegotiated such changes could have an adverse effect on our business, financial condition and results of operations. In addition, proceedings to enforce, or the enforcement of, any laws, regulations and policies by the U.S. or other countries, and the resulting response to such actions, may have an adverse effect on our business, financial condition and results of operations.
If we fail to comply with export control regulations, we could be subject to substantial fines or other sanctions, including loss of export privileges.
Certain of our products are subject to the Export Administration Regulations, administered by the BIS, which require that we obtain an export license before we can export products or technology to specified countries. Other products are subject to the International Traffic in Arms Regulations, which restrict the export of information and material that may be used for military or intelligence applications by a foreign person. U.S. regulators have announced “export control reform” that has changed and is expected to change many of the rules applicable to us in this area in the future in ways we do not yet fully understand and we have
experienced and will continue to experience challenges in complying with the new rules as they become effective, resulting in difficulties or an inability to ship products to certain countries and customers.
We are also subject to U.S. import regulations and the import and export regimes of other countries in which we operate. Failure to comply with these laws could result in sanctions by the U.S. government, including substantial monetary penalties, denial of export privileges and debarment from government contracts. Any change in export or import regulations or related legislation (or the interpretation thereof), shift in approach by regulators to the enforcement or scope of existing regulations, specific sanctions by regulators or change in the countries, persons or technologies targeted by such regulations, could harm our business by resulting in decreased use of our products by, or our decreased ability to export or sell our products to, existing or potential customers with international operations. In addition, our sale of our products to or through third-party distributors, resellers and sales representatives creates the risk that any violation of these laws they may engage in may disrupt our markets or otherwise bring liability on us.
Our financial results may be adversely affected by increased tax rates and exposure to additional tax liabilities.
Our effective tax rate is highly dependent upon the geographic composition of our worldwide earnings and tax regulations governing each region, each of which can change from period to period. We are subject to income taxes in both the U.S. and various foreign jurisdictions and significant judgment is required to determine our worldwide tax liabilities. Our effective tax rate as well as the actual tax ultimately payable could be adversely affected by changes in the amount of our earnings attributable to countries with differing statutory tax rates, changes in the valuation of our deferred tax assets, changes in tax laws (or the interpretation of those laws by regulators) or tax rates (particularly in the U.S. or Ireland), increases in non-deductible expenses, the availability of tax credits, material audit assessments or repatriation of non-U.S. earnings, each of which could materially affect our profitability. For example, as of October 1, 2021, we had $855.8 million of gross federal net operating loss (“NOL”) carryforwards, which, for those generated prior to the effective date of the 2017 Tax Cuts and Jobs Act (“Tax Act”), will expire at various dates through 2038, while those generated subsequent to the Tax Act have an indefinite carryforward with no expiration. However, our ability to use these federal NOL carryforwards and other deferred tax assets may be limited and, as a result of our conclusion that recovery of our U.S. deferred tax assets, including those assumed in the AppliedMicro Acquisition, is not considered more likely than not, we established a full valuation allowance against our U.S. deferred tax assets as of September 29, 2017. Any significant increase in our effective tax rates could materially reduce our net income in future periods and decrease the value of your investment in our common stock.
We may need to modify our activities or incur substantial costs to comply with environmental laws, and if we fail to comply with environmental laws, we could be subject to substantial fines or be required to change our operations.
We are subject to a variety of international, federal, state and local governmental regulations directed at preventing or mitigating climate change and other environmental harms, as well as to the storage, discharge, handling, generation, disposal and labeling of toxic or other hazardous substances used to manufacture our products which could restrict our ability to expand our facilities or build new facilities, or require us to acquire additional expensive equipment, modify our manufacturing processes, or incur other substantial expenses which could harm our business, financial condition and results of operations. If we fail to comply with these regulations, substantial fines could be imposed on us and we could be required to suspend production, alter manufacturing processes, cease operations or remediate polluted land, air or groundwater, any of which could have a negative effect on our revenue, results of operations and business. Failure to comply with environmental regulations could subject us to civil or criminal sanctions and property damage or personal injury claims. We have incurred in the past and may in the future incur environmental liability based on the actions of prior owners, lessees or neighbors of sites we have leased or may lease in the future, third party commercial waste disposal sites we utilize or sites we become associated with due to acquisitions.
In addition to the costs of complying with environmental, health and safety requirements, we may in the future incur costs defending against environmental litigation brought by government agencies, lessors at sites we currently lease or have been associated with in the past and other private parties. A significant judgment or fine levied against us or agreed settlement payment could materially harm our business, financial condition and results of operations. For example, since 1993, MACOM Connectivity Solutions, LLC (formerly known as AppliedMicro) has been named as a potentially responsible party (“PRP”) along with more than 100 other companies that used the Omega Chemical Corporation waste treatment facility in Whittier, California (the “Omega Site”). The U.S. Environmental Protection Agency has alleged that the Omega Site failed to properly treat and dispose of certain hazardous waste material. We are a member of a large group of PRPs, known as the Omega Chemical Site PRP Organized Group (“OPOG”), which has agreed to fund certain ongoing remediation efforts at and nearby the Omega Site and with respect to the regional groundwater allegedly contaminated thereby. Based on currently available information with respect to the total anticipated level of investigatory, remedial and monitoring costs to be incurred by the OPOG and our allocable share of those costs, we have a loss accrual for the Omega Site that is not material. However, the proceedings are ongoing and several factors beyond our control could cause this loss accrual to prove inadequate, and any future increases to our allocation of responsibility among the PRPs or the future reduction of parties participating in the PRP group could materially increase our potential liability relating to the Omega Site.
Environmental regulations such as the WEEE and RoHS directives limit our flexibility and may require us to incur material expense.
Various countries require companies selling a broad range of electrical equipment to conform to regulations such as the Waste Electrical and Electronic Equipment (“WEEE”) and the European Directive on Restriction of Hazardous Substances (“RoHS”). Environmental standards such as these could require us to redesign our products in order to comply with the standards, require the development of compliance administration systems or otherwise limit our flexibility in running our business or require us to incur substantial compliance costs. We have already invested significant resources into complying with these regimes, and further investments may be required. Alternative designs implemented in response to regulation may be costlier to produce, resulting in an adverse effect on our gross profit margin. If we cannot develop compliant products in a timely fashion or properly administer our compliance programs, our revenue may also decline due to lower sales, which would adversely affect our operating results. Further, if we were found to be non-compliant with any rule or regulation, we could be subject to fines, penalties and/or restrictions imposed by government agencies that could adversely affect our operating results.
Environmental, social and governance responsibility regulations, policies and provisions, as well as customer and investor demands, may make our supply chain more complex and may adversely affect our relationships with customers and investors.
There is an increasing focus on corporate environmental, social and governance (“ESG”) responsibility in the semiconductor industry, particularly with OEMs that manufacture consumer electronics. A number of our customers have adopted, or may adopt, procurement policies that include ESG provisions or requirements that their suppliers should comply with, or they may seek to include such provisions or requirements in their procurement terms and conditions. An increasing number of investors are also requiring companies to disclose corporate ESG policies, practices and metrics. Legal and regulatory requirements, as well as investor expectations, on corporate ESG practices and disclosure, are subject to change, can be unpredictable, and may be difficult and expensive for us to comply with, given the complexity of our supply chain and manufacturing. If we are unable to comply, or are unable to cause our suppliers or contract manufacturers to comply, with such policies or provisions or meet the requirements of our customers and our investors, a customer may stop purchasing products from us or an investor may sell their shares, and may take legal action against us, which could harm our reputation, revenue and results of operations.
Customer demands and regulations related to “conflict” minerals may force us to incur additional expenses and liabilities.
Pursuant to the Dodd-Frank Wall Street Reform and Consumer Protection Act, the SEC promulgated rules regarding disclosure and reporting requirements for companies who use “conflict” minerals mined from the Democratic Republic of Congo and adjoining countries in their products. In the semiconductor industry, these minerals are most commonly found in metals used in the manufacture of semiconductor devices and related assemblies. These requirements may adversely affect our ability to source related minerals and metals and increase our related cost. We face difficulties and increased expenses associated with complying with the related disclosure requirements, such as costs related to determining the source of any conflict minerals used in our products. Our supply chain is complex and some suppliers may be unwilling to share related confidential information regarding the source of their products or may provide us information that is inaccurate or inadequate. If those risks arise or if our processes in obtaining that information do not fulfill the SEC’s requirements, we may face both reputational challenges and SEC enforcement risks based on our inability to sufficiently verify the origins of the subject minerals and metals or otherwise. Moreover, we may encounter challenges to satisfy any related requirements of our customers, which may be different from or more onerous than the requirements of SEC rules and executive orders. If we cannot satisfy such customers, they may choose a competitor’s products or disqualify us as a supplier and we may experience lower than expected revenues or have to write off inventory in the event that it becomes unsalable as a result of these regulations.
Failure to comply with data privacy regimes could subject us to significant expenses, litigation and reputational harm.
In the ordinary course of our business, we have access to sensitive, confidential or personal data or information regarding our employees and others that is subject to privacy and security laws and regulations. The theft, loss, or misuse of personal data collected, used, stored or transferred by us, or by our third-party service providers, could result in damage to our reputation, disruption of our business activities, significantly increased business costs or costs related to defending legal claims or regulatory actions.
Global privacy legislation, enforcement and policy activity are rapidly expanding and creating a complex data privacy compliance environment and the potential for high-profile negative publicity in the event of any data breach. We are subject to many privacy and data protection laws and regulations in the United States and around the world, some of which place restrictions on our ability to process personal data across our business. For example, the General Data Protection Regulation (“GDPR”) became effective in the European Union on May 25, 2018,and requires compliance with rules regarding the handling of personal data, and California enacted the California Consumer Privacy Act (“CCPA”) as of January 1, 2020, which enhances privacy rights and consumer protection for residents of California. It is costly to comply with the GDPR, CCPA and other similar laws and regulations. Further, the GDPR provides for significant penalties in the case of non-compliance of up to €20 million or 4% of worldwide annual revenues, whichever is greater. We have invested, and continue to invest, human and technology resources into our data privacy compliance efforts. Despite those efforts, there is a risk that we may be subject to fines and penalties, litigation and reputational harm if we fail to protect the privacy of third party data or to comply with the applicable data privacy regimes.
Risks Relating to Business Strategies and Personnel
We face intense competition in our industry, and our inability to compete successfully could negatively affect our operating results.
The semiconductor industry is highly competitive. While we compete with a wide variety of companies, our significant competitors include, among others, NXP, Marvell, Maxlinear, Broadcom, Semtech, ADI, Wolfspeed, Microchip, Qorvo and Skyworks.
We believe future competition could also come from companies developing new alternative technologies, component suppliers based in countries with lower production costs and IC manufacturers achieving higher levels of integration that exceed the functionality offered by our products. Our customers and suppliers could also develop products that compete with or replace our products. Increased competition has in the past and could in the future lead to lower prices for our products, reduced demand for our products and a corresponding reduction in our ability to recover development, engineering and manufacturing costs.
Many of our existing and potential competitors have entrenched market positions, historical affiliations with OEMs, considerable internal manufacturing capacity, established intellectual property rights, strong brand recognition and substantial technological capabilities. Many of them may also have greater financial, technical, manufacturing or marketing resources than we do. Consolidation among our competitors could negatively impact our competitive position and market share and harm our results of operations. In addition, certain countries such as China have begun implementing initiatives to build domestic semiconductor supply chains and we may be at a disadvantage in attempting to compete with entities associated with such foreign government efforts. Our failure to successfully compete could result in lower revenue, decreased profitability and a lower stock price.
We may sell, wind down or exit one or more of our businesses or product lines, from time to time, as a result of our evaluation of our businesses, products and markets, and any such divestiture could adversely affect our continuing business.
We periodically evaluate our various businesses and product lines and may, as a result, consider the divestiture, wind down or exit of one or more of those businesses or product lines. Divestitures have inherent risks, including the inability to find potential buyers with favorable terms, the expense of selling the product line, the possibility that any anticipated sale will be delayed or will not occur and the potential delay or failure to realize the perceived strategic or financial merits of the divestment.
If we lose key personnel or fail to attract and retain key personnel, we may be unable to pursue business opportunities or develop our products.
We believe our continued ability to recruit, hire, retain and motivate highly-skilled engineering, operations, sales, administrative and managerial personnel is key to our future success. Competition for these employees is intense. Our failure to retain our present employees and hire additional qualified personnel in a timely manner and on reasonable terms could harm our competitiveness and results of operations. In particular, the loss of any member of our senior management team could strengthen a competitor, weaken customer relationships or harm our ability to implement our business strategy. In addition, from time to time, we may recruit and hire employees from our competitors, customers, suppliers and distributors, which could result in liability to us and has in the past and could in the future, damage our business relationship with these parties.
We depend on third-party sales representatives and distributors for a material portion of our revenues.
We sell many of our products to customers through independent sales representatives and distributors, as well as through our direct sales force. We are unable to predict the extent to which our independent sales representatives and distributors will be successful in marketing and selling our products. Our relationships with our representatives and distributors typically may be terminated by either party at any time, and do not require them to buy any of our products. Sales to distributors accounted for approximately 35.0% of our revenue for the fiscal year ended October 1, 2021, and sales to one of our distributors, Richardson, accounted for 10.7% of our revenue in the same period. If our sales representatives or distributors cease doing business with us or fail to successfully market and sell our products, our ability to sustain and grow our revenue could be materially adversely affected.
We may make future acquisitions and investments, which involve numerous risks.
We routinely evaluate potential acquisitions, investments, joint ventures and strategic alliances involving complementary technologies, design teams, products and companies. We may pursue such transactions if appropriate opportunities arise. However, we may not be able to identify suitable transactions in the future or, if we do, we may face intense competition for such opportunities. In the event we pursue a potential transaction, we will face numerous risks, including diverting management’s attention from normal daily operations of our business; difficulties in integrating the financial reporting capabilities and operating systems of any acquired operations to maintain effective internal control over financial reporting and disclosure controls and procedures; potential loss of key personnel of the acquired company as well as their know-how, relationships and expertise; challenges successfully integrating acquired personnel, operations and businesses; failing to realize the anticipated synergies and benefits of an acquisition; maintaining favorable business relationships of acquired operations; generating insufficient revenue from completed transactions to offset expenses associated with our efforts; acquiring material or unknown liabilities associated with any acquired operations; litigation associated with merger and acquisition transactions; and increasing expense associated with amortization or depreciation of intangible and tangible assets we acquire.
Past transactions, whether completed or abandoned by us, have resulted, and in the future may result, in significant time and attention, costs, expenses, liabilities and charges to earnings. The accounting treatment for any future transaction may result in significant amortizable intangible assets which, when amortized, will negatively affect our consolidated results of operations. The accounting treatment may also result in significant goodwill, which, if impaired, will negatively affect our consolidated results of operations. Furthermore, we may incur debt or issue equity securities to pay for transactions. The incurrence of debt could limit our operating flexibility and be detrimental to our profitability, and the issuance of equity securities would be dilutive to our existing stockholders. Any or all of the above factors may differ from the investment community’s expectations in a given quarter, which could negatively affect our stock price. In the event we make future investments, the investments may decline in value, we may lose all or part of our investment.
We may experience difficulties in managing any future growth.
To successfully conduct business in a rapidly evolving market, we must effectively plan and manage any current and future growth. Our ability to do so will be dependent on a number of factors, including maintaining access to sufficient manufacturing capacity to meet customer demands; securing sufficient supply of raw materials and services to avoid shortages or supply bottlenecks; adequately building out our administrative infrastructure to support any current and future sales growth while maintaining operating efficiencies; adhering to our high quality and process execution standards, particularly as we hire and train new employees and during periods of high volume; and maintaining high levels of customer satisfaction. If we do not effectively manage any future growth, we may not be able to take advantage of attractive opportunities in our markets, our operations may be impacted, and we may experience delays in delivering products to our customers or damaged customer relationships and achieve lower than anticipated revenue and decreased profitability.
We may incur higher than expected expense from or not realize the expected benefits, or any benefits, of consolidation, outsourcing and restructuring initiatives designed to reduce costs and increase revenue across our operations.
We have pursued in the past and may pursue in the future various restructuring initiatives designed to reduce costs and increase revenue across our operations, including reductions in our number of manufacturing facilities and workforce, establishing certain operations closer in location to our global customers and evaluating functions that may be more efficiently performed through outsourcing arrangements. For example, in June 2019, we committed to a restructuring plan designed to streamline and improve our operations that included the refocusing of certain research and development activities and a reduction in workforce. Any restructuring initiatives could result in potential adverse effects on employee capabilities, our continued ability to recruit, hire, retain and motivate highly-skilled engineering, operations, sales, administrative, managerial and other key personnel, our ability to achieve design wins and our ability to maintain and enhance our customer base. Such events could harm our efficiency and our ability to act quickly and effectively in the rapidly changing technology markets in which we sell our products. In addition, we may be unsuccessful in our efforts to realign our organizational structure and shift our investments. The potential negative impact of a restructuring plan on our employees may limit our ability to meet and satisfy the demands of our customers and, as a result, have a material impact on our business, financial condition and results of operations.
Restructuring initiatives can be substantial in scope and involve large expenditures. For example, in fiscal year 2019, we incurred restructuring charges of $19.5 million, consisting primarily of employee severance and related costs resulting from reductions in our workforce. Exiting a leased site may involve contractual or negotiated exit payments with the landlord, temporary holding over at an increased lease rate, costs to perform restoration work required by the lease or associated environmental liability, any of which may be material in amount. Consolidation of operations and outsourcing may involve substantial capital expenses and the transfer of manufacturing processes and personnel from one site to another, with resultant startup issues at the receiving site and the need for re-qualification of the transitioned operations with major customers and for ISO or other certifications. We may experience shortages of affected products, delays and higher than expected expenses. Affected employees may be distracted by the transition or seek other employment, which could cause our overall operational efficiency to suffer. Any of these issues or our failure to realize the expected benefits of a restructuring initiative could harm our results of operations and reduce the price of our common stock.
Risks Relating to Ownership of our Common Stock
We may engage in future capital-raising transactions that dilute the ownership of our existing stockholders or cause us to incur debt.
We may issue additional equity, debt or convertible securities to raise capital in the future. If we do, existing stockholders may experience significant further dilution. In addition, new investors may demand rights, preferences or privileges that differ from or are senior to, those of our existing stockholders. Our incurrence of indebtedness could limit our operating flexibility and be detrimental to our results of operations.
The market price of our common stock may be volatile, which could result in substantial losses for investors.
We cannot predict the prices at which our common stock will trade. The market price of our common stock may fluctuate significantly, depending upon many factors, some of which may be beyond our control. In addition to the risks described in this Annual Report, other factors that may cause the market price of our common stock to fluctuate include changes in general economic, political, industry and market conditions; general market price and volume fluctuations, including volatility resulting from the COVID-19 pandemic; domestic and international economic factors unrelated to our performance; actual or anticipated fluctuations in our quarterly operating results; changes in or failure to meet publicly disclosed expectations as to our future financial performance; changes in securities analysts’ estimates of our financial performance, lack of research and reports by industry analysts or negative research and reports by industry analysts; addition or loss of significant customers; announcements by us or our competitors, customers or suppliers of significant products, contracts, acquisitions, strategic partnerships or other events; any future sales of our common stock or other securities; and additions or departures of directors, executives or key personnel.
For example, on August 1, 2017 we announced results of operations for our third quarter of fiscal year 2017 and a financial outlook for our fourth quarter of fiscal year 2017 that were below the then-current consensus of securities analyst expectations. The closing price per share of our common stock thereafter declined from $61.06 on August 1, 2017 to $45.50 on August 2, 2017, and further to $39.67 on August 18, 2017, representing a cumulative decline of approximately 35.0%. In the past, companies that have experienced volatility in the market price of their stock have been subject to securities class action litigation. We may be the target of this type of litigation in the future. Securities litigation against us could result in substantial costs and divert our management’s attention from other business concerns, which could seriously harm our business.
If we fail to maintain effective internal controls over financial reporting, we may not be able to accurately report our financial results, which could have a material adverse effect on our operations, investor confidence in our business and the trading prices of our securities.
We are required to maintain disclosure controls and procedures and internal controls over financial reporting that are effective for the purposes described in “Item 9A - Controls and Procedures” below. The existence of a material weakness in our internal controls may adversely affect our ability to record, process, summarize and report financial information timely and accurately and, as a result, our financial statements may contain material misstatements or omissions, which could result in regulatory scrutiny, cause investors to lose confidence in our reported financial condition and otherwise have a material adverse effect on our business, financial condition, cash flow results of operations or the trading price of our stock.
Some of our stockholders can exert control over us and they may not make decisions that reflect our interests or those of other stockholders.
Our largest stockholders control a significant amount of our outstanding common stock. As of October 1, 2021, John and Susan Ocampo beneficially owned 26.6% of our common stock. As a result, these stockholders will be able to exert a significant degree of influence over our management and affairs and control over matters requiring stockholder approval, including the election of our directors and approval of significant corporate transactions. In addition, this concentration of ownership may delay or prevent a change in control of us and might affect the market price of our securities. In addition, the interests of these stockholders may not always coincide with your interests or the interests of other stockholders.
Anti-takeover provisions in our charter documents and Delaware law could prevent or delay a change in control of our company that stockholders may consider beneficial and may adversely affect the price of our stock.
Provisions of our fifth amended and restated certificate of incorporation and third amended and restated bylaws may discourage, delay or prevent a merger, acquisition or change of control that a stockholder may consider favorable. These provisions could also discourage proxy contests and make it more difficult for stockholders to elect directors and take other corporate actions. The existence of these provisions could limit the price that investors might be willing to pay in the future for shares of our common stock. These provisions include authorization of the issuance of “blank check” preferred stock, staggered elections of directors and advance notice requirements for nominations for election to the board of directors and for proposing matters to be submitted to a stockholder vote. Provisions of Delaware law may also discourage, delay or prevent someone from acquiring or merging with our company or obtaining control of our company. Specifically, Section 203 of the Delaware General Corporate Law may prohibit business combinations with stockholders owning 15% or more of our outstanding voting stock. Our board of directors could rely on Delaware law to prevent or delay an acquisition of us and this reliance could reduce our value.
We do not intend to pay dividends for the foreseeable future.
We do not intend to pay any cash dividends on our common stock in the foreseeable future. The payment of cash dividends is restricted under the terms of the agreements governing our indebtedness. In addition, because we are a holding company, our ability to pay cash dividends may be limited by restrictions on our ability to obtain sufficient funds through dividends from subsidiaries, including restrictions under the terms of the agreements governing our indebtedness. We anticipate that we will retain all of our future earnings for use in the development of our business and for general corporate purposes. Any determination to pay dividends in the future will be at the discretion of our board of directors. Accordingly, investors must rely on sales of their common stock after price appreciation, which may never occur, as the only way to realize any future gains on their investments.
Risks Relating to our 2026 Convertible Notes
Servicing our debt, including the 2026 Convertible Notes, requires a significant amount of cash, and we may not have sufficient cash flow from our business to pay our indebtedness.
Our ability to make payments of the principal of, to pay interest on, or to refinance, the 2026 Convertible Notes, or to make cash payments in connection with any conversion of the 2026 Convertible Notes depends on our future performance, which is subject to economic, financial, competitive and other factors beyond our control. Our business may not continue to generate cash flow from operations in the future sufficient to service the 2026 Convertible Notes or other indebtedness and make necessary capital expenditures. If we are unable to generate such cash flow, we may be required to adopt one or more alternatives, such as selling assets, restructuring indebtedness or obtaining additional equity capital on terms that may be onerous or highly dilutive. Our ability to refinance the 2026 Convertible Notes or our other indebtedness will depend on the capital markets and our financial condition at such time. We may not be able to engage in any of these activities or engage in these activities on desirable terms, which could result in a default on our debt obligations.
Provisions in indenture governing the 2026 Convertible Notes may delay or prevent an otherwise beneficial business combination.
The terms of the 2026 Convertible Notes require us to repurchase the 2026 Convertible Notes in the event of a “fundamental change” as defined under the indenture governing the 2026 Convertible Notes. A fundamental change of our Company would trigger an option of the holders of the 2026 Convertible Notes to require us to repurchase the 2026 Convertible Notes. In addition, if a make-whole fundamental change occurs prior to the maturity date of the 2026 Convertible Notes, we will in some cases be required to increase the conversion rate for a holder that elects to convert its 2026 Convertible Notes. Furthermore, the indenture that governs the 2026 Convertible Notes prohibits us from engaging in certain mergers or acquisitions unless, among other things, the surviving entity assumes our obligations under the 2026 Convertible Notes. This may have the effect of delaying or preventing an acquisition of our Company that could be beneficial to investors.
We may not have the ability to raise the funds necessary to settle conversions of the 2026 Convertible Notes in cash or to repurchase the 2026 Convertible Notes upon a fundamental change and our debt may limit our ability to pay cash upon conversion or repurchase of the 2026 Convertible Notes.
Holders of the 2026 Convertible Notes have the right to require us to repurchase their 2026 Convertible Notes upon the occurrence of a fundamental change at a purchase price equal to 100% of the principal amount of the 2026 Convertible Notes to be repurchased, plus accrued and unpaid interest, if any, to, but not including, the fundamental change repurchase date. In addition, unless we elect to deliver solely shares of our common stock upon conversion, we will be required to make cash payments in respect of the 2026 Convertible Notes being converted. However, we may not have enough available cash or be able to obtain financing at the time we are required to make purchases of the 2026 Convertible Notes, and our failure to do so would constitute a default under the indenture governing the 2026 Convertible Notes. In addition, our ability to repurchase the 2026 Convertible Notes or to pay cash upon conversion of the 2026 Convertible Notes could be limited by law, by regulatory authority or by agreements that will govern our future indebtedness. A default under the indenture governing the 2026 Convertible Notes or the fundamental change itself could also lead to a default under agreements governing our existing or future indebtedness.
ITEM 1B. UNRESOLVED STAFF COMMENTS.
ITEM 2. PROPERTIES.
Our principal executive offices are located in a leased facility in Lowell, Massachusetts. In addition to our corporate headquarters facility the following is a list of our main leased facilities and their primary functions.
Major Activity (1)
|A, P&F, T&A, AE, S&M and RT||281,700|
Santa Clara, California
|R&D, AE and S&M||46,270|
Newport Beach, California
|R&D, AE and S&M||57,412|
Ann Arbor, Michigan
|P&F, R&D and T&A, RT||50,335|
Nashua, New Hampshire
|R&D, T&A, P&F and RT||33,750|
A, R&D, S&M, AE and RT
|(1) Major activities include Administration (A), Research and Development (R&D), Production and Fabrication (P&F), Sales and Marketing (S&M), Application Engineering (AE), Test and Assembly (T&A) and Reliability Testing (RT).|
For additional information regarding property and equipment by geographic region for each of the last two fiscal years and additional information on all of our lease obligations, see the Notes to Consolidated Financial Statements in “Item 8 - Financial Statements and Supplementary Data” below.
ITEM 3. LEGAL PROCEEDINGS.
From time to time we may be subject to commercial and employment disputes, claims by other companies in the industry that we have infringed their intellectual property rights and other similar claims and litigation. Any such claims may lead to future litigation and material damages and defense costs. Other than as set forth below, we were not involved in any pending legal proceedings as of the filing date of this Annual Report that we believe would have a material adverse effect on our business, operating results, financial condition or cash flows.
Certain legal proceedings in which we are involved, if any, are discussed in Note 15 - Commitments and Contingencies to our Consolidated Financial Statements included in this Annual Report which is incorporated by reference herein.
ITEM 4. MINE SAFETY DISCLOSURES.
ITEM 5. MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES.
Our common stock has been listed on the Nasdaq Global Select Market under the symbol “MTSI” since March 15, 2012. The number of stockholders of record of our common stock as of November 11, 2021 was approximately 75. The number of stockholders of record does not include beneficial owners whose shares are held by nominees in street name.
Stock Price Performance Graph
The following graph shows a comparison from September 30, 2016 through October 1, 2021 of the total cumulative return of our common stock with the total cumulative return of the NASDAQ Composite Index and the PHLX Semiconductor Index. The amounts represented below assume an investment of $100.00 in our common stock at the closing price of $42.34 on September 30, 2016 and in the Nasdaq Composite Index and the PHLX Semiconductor Index on the closest month end date of September 30, 2016, and assume reinvestment of dividends. The comparisons in the graph are historical and are not intended to forecast or be indicative of possible future performance of our common stock.
|September 30, 2016||September 29, 2017||September 28, 2018||September 27, 2019||October 2, 2020||October 1, 2021|
|MACOM Technology Solutions Holdings, Inc.||$100.00||$105.36||$48.65||$51.20||$79.83||$154.32|
|Nasdaq Composite Index||$100.00||$123.68||$154.82||$154.46||$217.58||$288.09|
|PHLX Semiconductor Index||$100.00||$142.61||$169.26||$194.96||$285.67||$424.70|
Issuer Purchases of Equity Securities
The following table presents information with respect to purchases of common stock we made during the fiscal quarter ended October 1, 2021.
Total Number of Shares (or Units)
|Average Price Paid per Share (or Unit)|
Total Number of Shares (or Units) Purchased as Part of Publicly Announced Plans or Programs
Maximum Number (or Approximate Dollar Value) of Shares (or Units) that May Yet Be Purchased Under the Plans or Programs
|July 3, 2021—July 30, 2021||57 ||$||58.20 ||— ||—|
|July 31, 2021—August 27, 2021||234 ||61.11 ||— ||—|
|August 28, 2021—October 1, 2021||243 ||63.10 ||— ||—|
|534 ||$||61.70 ||— ||—|
(1)Our board of directors has approved “withhold to cover” as a tax payment method for vesting of restricted stock awards for our employees. Pursuant to an election for “withhold to cover” made by our employees in connection with the vesting of such awards, all of which were outside of a publicly-announced repurchase plan, we withheld from such employees the shares noted in the table above to cover tax withholding related to the vesting of their awards. The average prices listed in the above table are averages of the fair market prices at which we valued shares withheld for purposes of calculating the number of shares to be withheld.
ITEM 6. [RESERVED]
ITEM 7. MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATION.
The following discussion and analysis of our financial condition and results of operations should be read in conjunction with our consolidated financial statements and related notes that appear elsewhere in this Annual Report. In addition to historical information, the following discussion contains forward-looking statements that are subject to risks and uncertainties. Actual results may differ substantially and adversely from those referred to herein due to a number of factors, including but not limited to those described below and in “Item 1A - Risk Factors” and elsewhere in this Annual Report.
We design and manufacture semiconductor products for Telecom, I&D and Data Center applications. Headquartered in Lowell, Massachusetts, we have more than 70 years of application expertise, with silicon, GaAs and InP fabrication, manufacturing, assembly and test, and operational facilities throughout North America, Europe and Asia. We design, develop and manufacture differentiated, high-value products for customers who demand high performance, quality and reliability. We offer a broad portfolio of thousands of standard and custom devices, which include ICs, MCMs, diodes, amplifiers, switches and switch limiters, passive and active components and complete subsystems, across dozens of product lines serving over 6,000 end customers in three primary markets. Our semiconductor products are electronic components that our customers generally incorporate into larger electronic systems, such as, wireless basestations, high capacity optical networks, radar, medical systems and test and measurement. Our primary markets are: (1) Telecom, which includes carrier infrastructure such as long-haul/metro, 5G and FTTx/PON, among others; (2) I&D, which includes military and commercial radar, RF jammers, electronic countermeasures, communication data links, satellite communications and multi-market applications, which include industrial, medical, test and measurement and scientific applications; and (3) Data Center, enabled by our broad portfolio of analog ICs and photonic components for high speed optical module customers.
See “Item 1 - Business” for additional information.
Basis of Presentation
We have one reportable operating segment and all intercompany balances have been eliminated in consolidation.
We have a 52 or 53-week fiscal year ending on the Friday closest to the last day of September. Fiscal years 2021 and 2019 each consisted of 52 weeks, and fiscal year 2020 included 53 weeks. To offset the effect of holidays, for fiscal years in which there are 53 weeks, we typically include the extra week in the first quarter of our fiscal year. Our first quarter of fiscal year 2020, ended January 3,
2020, included 14 weeks.
Description of Our Revenue
Revenue. Our revenue is derived from sales of high-performance RF, microwave, millimeter wave, optical and photonic semiconductor products. We design, integrate, manufacture and package differentiated, semiconductor-based products that we sell to customers through our direct sales organization, our network of independent sales representatives and our distributors. We believe the primary drivers of our future revenue growth will include:
•continued growth in the demand for high-performance analog, digital and optical semiconductors in our three primary markets;
•introducing new products using advanced technologies, added features, higher levels of integration and improved performance;
•increasing content of our semiconductor solutions in customers’ systems through cross-selling our product lines;
•leveraging our core strength and leadership position in standard, catalog products that service all of our end applications; and
•engaging early with our lead customers to develop custom and standard products.
Our core strategy is to develop and innovate high-performance products that address our customers’ most difficult technical challenges in our primary markets: Telecom, I&D and Data Center.
We expect our revenue in the Telecom market to be driven by 5G deployments, with continued upgrades and expansion of communications equipment, and increasing adoption of our high-performance RF, millimeter wave, optical and photonic components.
We expect our revenue in the I&D market to be driven by the expanding product portfolio that we offer which services applications such as test and measurement, satellite communications, civil and military radar, industrial, scientific and medical applications, further supported by growth in applications for our multi-market catalog products.
We expect our revenue in the Data Center market to be driven by the adoption of cloud-based services and the upgrade of data center architectures, to 100G, 200G, 400G and 800G interconnects, which we expect will drive adoption of higher speed optical and photonic components.
See “Item 1 - Business.” For additional information on risk factors that could impact our future results, please refer to “Item 1A - Risk Factors” in this Annual Report.
CRITICAL ACCOUNTING POLICIES AND ESTIMATES
Our discussion and analysis of our financial condition and results of operations are based on our consolidated financial statements. The preparation of financial statements, in conformity with generally accepted accounting principles in the U.S., requires management to make estimates and judgments that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenue and expenses during the reporting period. By their nature, these estimates and judgments are subject to an inherent degree of uncertainty and could be material if our actual or expected experience were to change unexpectedly. On an ongoing basis, we re-evaluate our estimates and judgments.
Due to the COVID-19 pandemic, there has been uncertainty and disruption in the global economy and financial markets. We are not aware of any specific event or circumstance that would require updates to our estimates or judgments or require us to revise the carrying value of our assets or liabilities as of the date of filing of this Annual Report on Form 10-K with the SEC. These estimates may change as new events occur and additional information is obtained. Actual results could differ materially from these estimates under different assumptions or conditions.
We base our estimates and judgments on our historical experience and on other assumptions that we believe are reasonable under the circumstances, the results of which form the basis for making the judgments about the carrying values of assets and liabilities that are not readily apparent from other sources. Actual results could differ from those estimates and material effects on our operating results and financial position may result. The accounting policies which our management believes involve the most significant application of judgment or involve complex estimation, are inventories and associated reserves; goodwill and long-lived asset valuations and associated impairment assessments; revenue reserves; share-based compensation valuations and income taxes.
When we evaluate inventory for excess quantities and obsolescence, we utilize historical product usage experience and expected demand for establishing our reserve estimates. Our actual product usage may vary from the historical experience and estimating demand is inherently difficult, particularly given the cyclical nature of the semiconductor industry, both of these factors may result in us recording excess and obsolete inventory amounts that do not match the required amounts.
Our goodwill impairment assessment requires management to make assumptions and to apply judgment to items such as the determination of the reporting unit.
Significant management judgment is required in our valuation of long-lived asset groups when assessing for potential impairment. These analyses are based on the creation of forecasts of future operating results that are used in the valuation, including estimation of (i) future cash flows, (ii) the long-term rate of growth for our business, (iii) the useful life over which cash flows will occur, (iv) terminal values, if applicable, and (v) the determination of our weighted average cost of capital, which is used to determine the discount rate. It is possible that these forecasts may change and our projections included in our forecasts of future results may prove to be inaccurate. If our actual results, or the forecasts and estimates used in future impairment analyses, are lower than the original estimates used to assess the recoverability of these assets, we could incur impairment charges. Our forecasts and the value of our long-lived asset groups could be adversely affected by, but not limited to, a change in strategy, the outcome of development activities, a significant slowdown in our primary markets, the semiconductor industry or worldwide economy, or a decline in the valuation of technology company stocks, including the valuation of our common stock.
We establish revenue reserves, primarily for distributor price adjustments, which requires the use of judgment and estimates that impact the amount and timing of revenue recognition. We record reductions of revenue for such distributor pricing adjustments in the same period that the related revenue is recorded based on estimates of historical pricing adjustments granted to distributors. The actual pricing adjustments granted to distributors may significantly exceed or be less than the historical estimates resulting in adjustments to revenue in the incorrect period.
We account for share-based compensation arrangements using the fair value method as described in Note 2 - Summary of Significant Accounting Policies to our Consolidated Financial Statements in this Annual Report. There are a significant number of estimates and assumptions required for the initial valuation as well as for the ongoing valuation of certain share-based compensation items. These estimates may vary significantly and the assumptions may not be accurate resulting us to make adjustments to historically recorded balances.
We are required to estimate our income taxes in each of the jurisdictions in which we operate. This process involves estimating our actual current tax exposure together with assessing temporary differences resulting from differing treatment of items for tax and accounting purposes. These differences result in deferred tax assets and liabilities, which are included within our Consolidated Balance Sheets. We then assess the likelihood that our deferred tax assets will be recovered from future taxable income within the relevant jurisdiction and to the extent we believe that recovery is not likely, we must establish a valuation allowance. We provide valuation allowances for certain of our deferred tax assets, where it is more likely than not that some portion, or all of such assets, will not be realized.
The application of tax laws and regulations to calculate our tax liabilities is subject to legal and factual interpretation, judgment, and uncertainty in a multitude of jurisdictions. Tax laws and regulations themselves are subject to change as a result of changes in fiscal policy, changes in legislation, the evolution of regulations, and court rulings. We recognize potential liabilities for anticipated tax audit issues in the United States and other tax jurisdictions based on our estimate of whether, and the extent to which, additional taxes and interest will be due. We record an amount as an estimate of probable additional income tax liability at the largest amount that we feel is more likely than not, based upon the technical merits of the position, to be sustained upon audit by the relevant tax authority.
Historically, we have not experienced material differences in our estimates and actual results.
For additional information related to these and other accounting policies refer to Note 2 - Summary of Significant Accounting Policies to our Consolidated Financial Statements included in this Annual Report which is incorporated by reference herein.
RESULTS OF OPERATIONS
The following table sets forth, for the periods indicated, our Statements of Operations data (in thousands):
|Revenue||$||606,920 ||$||530,037 ||$||499,708 |
Cost of revenue (1)
|265,065 ||259,871 ||279,000 |
|Gross profit||341,855 ||270,166 ||220,708 |
Research and development (1)
|138,844 ||141,333 ||163,469 |
Selling, general and administrative (1)
|122,009 ||124,306 ||153,286 |
Impairment charges (2)
|— ||— ||264,786 |
Restructuring charges (3)
|— ||1,139 ||19,543 |
| Total operating expenses||260,853 ||266,778 ||601,084 |
|Income (loss) from operations||81,002 ||3,388 ||(380,376)|
|Other (expense) income:|
Warrant liability (expense) gain (4)
| Interest expense||(20,593)||(27,380)||(35,803)|
Other expense, net (5)
| Other expense, net||(38,057)||(44,950)||(42,777)|
|Income (loss) before income taxes||42,945 ||(41,562)||(423,153)|
|Income tax expense (benefit)||4,972 ||4,516 ||(39,355)|
|Net income (loss)||$||37,973 ||$||(46,078)||$||(383,798)|
(1)Includes (a) amortization expense related to intangible assets arising from acquisitions and (b) share-based compensation expense included in our Consolidated Statements of Operations as set forth below (in thousands):
| Fiscal Years|
|(a) Intangible amortization expense:|
| Cost of revenue||$||15,296 ||$||17,462 ||$||29,847 |
| Selling, general and administrative||30,917 ||32,868 ||44,872 |
|Total intangible amortization expense||$||46,213 ||$||50,330 ||$||74,719 |
|(b) Share-based compensation expense:|
| Cost of revenue||$||3,298 ||$||3,609 ||$||2,936 |
| Research and development||13,332 ||12,794 ||8,551 |
| Selling, general and administrative||18,368 ||19,271 ||12,305 |
|Total share-based compensation expense||$||34,998 ||$||35,674 ||$||23,792 |
(2)Impairment charges in fiscal year 2019 include $264.8 million for impairment of customer relationship and acquired technology intangible assets as well as equipment. See Note 10 - Impairments to the Consolidated Financial Statements included in this Annual Report for additional information.
(3)See Note 12 - Restructurings, to the Consolidated Financial Statements included in this Annual Report for additional information.
(4)Represents changes in the fair value of common stock warrants recorded as liabilities and adjusted each reporting period to fair value. See Note 19 - Stockholders' Equity to the Consolidated Financial Statements included in this Annual Report for additional information regarding the common stock warrants.
(5)Includes $2.4 million, $3.4 million and $7.5 million of non-cash net losses for fiscal years 2021, 2020 and 2019, respectively, associated with our equity method investment in Ampere based on our proportionate share of the losses and changes in equity of Ampere. The net loss amounts for fiscal years 2021, 2020 and 2019 include non-cash gains of $9.8 million and $16.6 million and $10.8 million, respectively, associated with changes in Ampere’s equity. See Note 4 - Investments to the Consolidated Financial Statements included in this Annual Report for additional information. Fiscal year 2021 also includes losses on extinguishment of debt of $4.4 million. See Note 16 - Debt to the Consolidated Financial Statements included in this Annual Report for additional information.
The following table sets forth, for the periods indicated, our Statements of Operations data expressed as a percentage of our revenue:
|Revenue||100.0 ||%||100.0 ||%||100.0 ||%|
|Cost of revenue||43.7 ||49.0 ||55.8 |
|Gross profit||56.3 ||51.0 ||44.2 |
|Research and development||22.9 ||26.7 ||32.7 |
|Selling, general and administrative||20.1 ||23.5 ||30.7 |
|Impairment charges||— ||— ||53.0 |
|Restructuring charges||— ||0.2 ||3.9 |
| Total operating expenses||43.0 ||50.3 ||120.3 |
|Income (loss) from operations||13.3 ||0.6 ||(76.1)|
|Other (expense) income:|
|Warrant liability (expense) gain||(1.8)||(2.4)||0.2 |
|Interest expense, net||(3.4)||(5.2)||(7.2)|
|Other expense, net||(1.0)||(0.9)||(1.5)|
| Total other expense, net||(6.3)||(8.5)||(8.6)|
|Income (loss) before income taxes||7.1 ||(7.8)||(84.7)|
|Income tax expense (benefit)||0.8 ||0.9 ||(7.9)|
|Net income (loss)||6.3 ||%||(8.7)||%||(76.8)||%|
Comparison of Fiscal Year Ended October 1, 2021 to Fiscal Year Ended October 2, 2020
Revenue. In fiscal year 2021, our revenue increased by $76.9 million, or 14.5%, to $606.9 million from $530.0 million for fiscal year 2020. Fiscal year 2021 consisted of 52 weeks, and fiscal year 2020 included 53 weeks.
Revenue from our primary markets, the percentage of change between the years and revenue by primary markets expressed as a percentage of total revenue were (in thousands, except percentages):
| Fiscal Years|
|2021||2020|| % Change|
|Telecom||$||188,391 ||$||209,477 ||(10.1)||%|
|Industrial & Defense||280,221 ||194,506 ||44.1 ||%|
|Data Center||138,308 ||126,054 ||9.8 ||%|
| Total||$||606,920 ||$||530,037 ||14.5 ||%|
|Telecom||31.0 ||%||39.5 ||%|
|Industrial & Defense||46.2 ||%||36.7 ||%|
|Data Center||22.8 ||%||23.8 ||%|
| Total||100.0 ||%||100.0 ||%|
In fiscal year 2021, our Telecom market revenue decreased by $21.1 million, or 10.1%, compared to fiscal year 2020. The decrease was primarily driven by a decrease in carrier-based optical semiconductor products, including those targeted for 5G applications, offset by increased sales of legacy products, including products targeting fiber to the home, CATV infrastructure and licensing revenue.
In fiscal year 2021, our I&D market revenue increased by $85.7 million, or 44.1%, compared to fiscal year 2020. The increase was primarily related to new program wins and expansion of our RF and microwave product lines.
In fiscal year 2021, our Data Center market revenue increased by $12.3 million, or 9.8%, compared to fiscal year 2020. The increase was primarily due to increased sales of our high-performance analog and optoelectronics Data Center products.
Gross profit. In fiscal year 2021, our gross profit increased by $71.7 million, or 26.5%, compared to fiscal year 2020. Gross margin of 56.3% in fiscal year 2021 increased 530 basis points, compared to fiscal year 2020. The increase in gross profit during 2021 was primarily the result of higher sales, favorable revenue mix, production efficiencies, as well as decreases in depreciation and amortization.
Research and development. In fiscal year 2021, research and development expense decreased by $2.5 million, or 1.8%, to $138.8 million representing 22.9% of revenue, compared with $141.3 million, representing 26.7% of revenue in fiscal year 2020. Research and development expense decreased during fiscal year 2021 primarily as a result of decreased spending on software and lower depreciation, partially offset by higher supplies expense, foundry costs and outside service costs.
Selling, general and administrative. In fiscal year 2021, selling, general and administrative expenses decreased by $2.3 million, or 1.8%, to $122.0 million, or 20.1% of revenue, compared with $124.3 million, or 23.5% of revenue, for fiscal year 2020. Selling, general and administrative expenses decreased during fiscal year 2021 primarily due to lower depreciation, amortization and other outside service costs, offset by an increase in variable selling costs.
Restructuring charges. There were no restructuring charges incurred during fiscal year 2021, compared with $1.1 million, or 0.2% of our revenue, for fiscal year 2020. All restructuring actions were completed as of October 2, 2020. Refer to Note 12 - Restructurings in this Annual Report on Form 10-K for additional information.
Warrant liability gain. In fiscal year 2021, we recorded warrant expense of $11.1 million, or 1.8% of revenue, compared to an expense of $12.9 million, or 2.4% of revenue, for fiscal year 2020. The difference between periods was driven by a change in the estimated fair value of common stock warrants, primarily driven by the increase in the underlying price of our common stock, which was recorded as a liability at fair value. During November 2020, all of the warrants were exercised and 857,631 shares of common stock were issued. As of October 1, 2021, there are no remaining common stock warrants outstanding. See Note 19 - Stockholders' Equity in this Annual Report for additional information regarding the common stock warrants.
Interest expense, net. In fiscal year 2021, interest expense, net was $20.6 million, or 3.4% of our revenue, compared to $27.4 million, or 5.2% of our revenue, for fiscal year 2020. The decrease in fiscal year 2021 is primarily due to a lower effective interest rate on our Term Loans and the decrease in our long-term debt balance.
Provision for income taxes. In fiscal year 2021, income tax expense was $5.0 million, or 0.8% of revenue, compared to an expense of $4.5 million, or 0.9% of revenue, for fiscal year 2020. The change in the provision is primarily due to a change in the valuation allowance.
The difference between the U.S. federal income tax rate of 21% and our effective income tax rate of 11.6% for fiscal year 2021 was primarily driven by the continuation of a full valuation allowance against any tax expense associated with U.S. income and income taxed in foreign jurisdictions at generally lower tax rates. For fiscal year 2020, our effective income tax rate of (10.9)% was primarily impacted by the continuation of a full valuation allowance against any benefit associated with U.S. losses and income taxed in foreign jurisdictions at generally lower tax rates.
Comparison of Fiscal Year Ended October 2, 2020 to Fiscal Year Ended September 27, 2019
Revenue. In fiscal year 2020, our revenue increased by $30.3 million, or 6.1%, to $530.0 million from $499.7 million for fiscal year 2019. Fiscal year 2020 included 53 weeks and fiscal year 2019 consisted of 52 weeks. Our first quarter of fiscal year 2020, ended January 3, 2020, included 14 weeks.
Revenue from our primary markets, the percentage of change between the years and revenue by primary markets expressed as a percentage of total revenue were (in thousands, except percentages):
| Fiscal Years|
|2020||2019|| % Change|
|Telecom||$||209,477 ||$||180,938 ||15.8 ||%|
|Industrial & Defense||194,506 ||204,638 ||(5.0)||%|
|Data Center||126,054 ||114,132 ||10.4 ||%|
| Total||530,037 ||499,708 ||6.1 ||%|
|Telecom||39.5 ||%||36.2 ||%|
|Industrial & Defense||36.7 ||%||41.0 ||%|
|Data Center||23.8 ||%||22.8 ||%|
| Total||100.0 ||%||100.0 ||%|
In fiscal year 2020, our Telecom market revenue increased by $28.5 million, or 15.8%, compared to fiscal year 2019. The increase was primarily driven by increased sales of carrier-based optical semiconductor products, including those targeted for 5G applications, primarily to our Asia customer base, partially offset by lower sales of legacy products.
In fiscal year 2020, our I&D market revenue decreased by $10.1 million, or 5.0%, compared to fiscal year 2019. The decrease was primarily related to the decline in certain defense-related programs and lower sales of certain legacy product lines.
In fiscal year 2020, our Data Center market revenue increased by $11.9 million, or 10.4%, compared to fiscal year 2019. The increase was primarily due to increased sales of our high-performance analog Data Center products.
Gross profit. In fiscal year 2020, our gross profit increased by $49.5 million, or 22.4%, compared to fiscal year 2019. Gross margin of 51.0% in fiscal year 2020 increased 680 basis points, compared to fiscal year 2019. The increase in gross profit during 2020 was primarily the result of lower inventory reserve expenses and the strategic realignment of our business under the 2019 Plan (as defined below), resulting in lower compensation-related costs and intangible amortization.
Research and development. In fiscal year 2020, research and development expense decreased by $22.1 million, or 13.5%, to $141.3 million representing 26.7% of revenue, compared with $163.5 million, representing 32.7% of revenue in fiscal year 2019. Research and development expense decreased during fiscal year 2020 primarily as a result of the strategic realignment of our business and operations under the 2019 Plan, resulting in lower compensation and research and development related costs, partially offset by higher share-based compensation expense.
Selling, general and administrative. In fiscal year 2020, selling, general and administrative expenses decreased by $29.0 million, or 18.9%, to $124.3 million, or 23.5% of revenue, compared with $153.3 million, or 30.7% of revenue, for fiscal year 2019. Selling, general and administrative expenses decreased during fiscal year 2020 primarily due to lower intangible amortization expense, decreased discretionary spending, such as external services and travel, offset by an increase in share-based compensation expense.
Impairment charges. In fiscal year 2019, impairment charges were $264.8 million, or 53.0% of revenue, primarily related to the $257.0 million impairment of intangible assets, as well as the impairment of $7.1 million of equipment from construction in process that was not placed in service. See Note 10 - Impairments to the Consolidated Financial Statements included in this Annual Report for additional information.
Restructuring charges. In fiscal year 2020, restructuring charges were $1.1 million, or 0.2% of our revenue, compared with $19.5 million, or 3.9% of our revenue, for fiscal year 2019. In fiscal year 2019, restructuring charges primarily related to the 2019 Plan and the Ithaca Plan, each as defined below.
During the third quarter of fiscal 2019, we committed to a plan to strategically realign, streamline and improve certain of our business and operations, including reducing our workforce by approximately 250 employees, and exiting multiple development facilities, reducing certain development activities for one of our product lines and no longer investing in the design and development of optical modules and subsystems for Data Center applications (the “2019 Plan”). During the fiscal year ended October 2, 2020, we incurred restructuring expenses of $1.2 million under the 2019 Plan, including $0.8 million of facility-related costs and $0.4 million of employee-related costs. We incurred restructuring charges of $11.6 million in fiscal year 2019, including $6.3 million of employee-related costs, $4.0 million of impairment expense for fixed assets and $1.3 million of other facility-related costs. This action was completed during fiscal 2020 and the remaining charges were paid during fiscal year 2021.
During the fiscal quarter ended September 28, 2018, we committed to a plan to exit certain production and product lines, primarily related to certain production facilities located in Ithaca, New York (the “Ithaca Plan”). For these facilities, we incurred $5.5 million of restructuring charges in the fiscal year ended September 27, 2019, including $1.5 million of employee-related costs and $4.0 million of facility-related costs. This action was completed in fiscal year 2019 and no further costs were incurred.
Refer to Note 12 - Restructurings in this Annual Report on Form 10-K for additional information.
Warrant liability gain. In fiscal year 2020, we recorded warrant expense of $12.9 million, or 2.4% of revenue, compared to a gain of $0.8 million, or 0.2% of revenue, for fiscal year 2019. The difference between periods was driven by an increase in the estimated fair value of common stock warrants we issued in December 2010, which we carry as a liability at fair value. Substantially all of the warrants were exercised and common stock was issued on November 11, 2020. See Note 19 - Stockholders' Equity in this Annual Report for additional information regarding the common stock warrants.
Provision for income taxes. In fiscal year 2020, income tax expense was $4.5 million, or 0.9% of revenue, compared to a benefit of $39.4 million, or 7.9% of revenue, for fiscal year 2019. The change in the provision is primarily due to recognition of current and deferred income tax effects totaling $39.8 million during fiscal year 2019, from an intra-entity transfer of a license for intellectual property between foreign tax jurisdictions that received a tax basis step-up, with no similar benefit during fiscal year 2020.
The difference between the U.S. federal income tax rate of 21% and our effective income tax rate of (10.9)% for fiscal year 2020 was primarily driven by the continuation of a full valuation allowance against any benefit associated with U.S. losses and income taxed in foreign jurisdictions at generally lower tax rates. For fiscal year 2019, our effective income tax rate of 9.3% was primarily impacted by the reduction of our NOLs from Section 382 limitations, the immediate recognition of the current and deferred income tax effects of an intra-entity transfer of a license for intellectual property and the valuation allowance against our U.S. deferred tax assets.
LIQUIDITY AND CAPITAL RESOURCES
The following table summarizes our cash flow activities for the fiscal years ended October 1, 2021 and October 2, 2020, respectively (in thousands):
|Fiscal Year Ended|
|October 1, 2021||October 2, 2020|
|Cash and cash equivalents, beginning of period||$||129,441 ||$||75,519 |
|Net cash provided by operating activities||148,412 ||171,397 |
|Net cash used in investing activities||(2,583)||(107,195)|
|Net cash used in financing activities||(119,095)||(10,716)|
|Effect of exchange rates on cash balances||362 ||436 |
|Cash and cash equivalents, end of period||$||156,537 ||$||129,441 |
Cash Flow from Operating Activities:
Our cash flow from operating activities for fiscal year 2021 was $148.4 million and consisted of a net income of $38.0 million, plus adjustments to reconcile our net income to cash provided by operating activities of $136.4 million, partially offset by changes in operating assets and liabilities of $25.9 million. Adjustments to reconcile our net income to cash provided by operating activities of $136.4 million primarily included depreciation and intangible amortization expense of $70.0 million, share-based compensation expense of $35.0 million, warrant liability expense of $11.1 million, accretion of the discount on convertible debt of $7.6 million and deferred financing cost amortization and write offs of $6.5 million. In addition, cash used by operating assets and liabilities was $25.9 million for fiscal year 2021, primarily driven by an increase in accounts receivable of $38.7 million due to timing of sales, partially offset by a decrease in inventory of $8.9 million and an increase in accounts payable of $5.8 million.
Our cash flow from operating activities for fiscal year 2020 was $171.4 million and consisted of a net loss of $46.1 million, plus adjustments to reconcile our net loss to cash provided by operating activities of $142.1 million plus changes in operating assets and liabilities of $75.5 million. Adjustments to reconcile our net loss to cash provided by operating activities of $142.1 million primarily included depreciation and intangible amortization expense of $78.8 million, share-based compensation expense of $35.7 million, warrant liability expense of $12.9 million, impairment and net loss on minority equity investments of $5.9 million, amortization of deferred financing costs of $4.1 million and a decrease in deferred tax assets of $3.3 million. In addition, cash from operating assets and liabilities was $75.5 million for fiscal year 2020, primarily driven by a decrease in accounts receivable of $23.9 million due to improved revenue linearity, a decrease in inventory of $16.3 million, a decrease in income tax receivable of $14.9 million and a decrease in prepaid expenses and other assets of $18.1 million.
Cash Flow from Investing Activities:
Our cash flow used in investing activities for fiscal year 2021 consisted primarily of $194.2 million in purchases of short-term investments and capital expenditures of $18.0 million, partially offset by proceeds of $209.3 million related to the sale and maturities of short-term investments.
Our cash flow used in investing activities for fiscal year 2020 consisted primarily of $284.9 million in purchases of short-term investments, proceeds of $183.9 million related to the sale and maturities of short-term investments, capital expenditures of $17.6 million and proceeds of $11.0 million associated with our divestment in May 2018 of certain capital equipment, inventory and other assets in Japan associated with the LR4 business.
Cash Flow from Financing Activities:
During fiscal year 2021, our cash used in financing activities of $119.1 million was primarily related to $545.3 million of prepayments on our Term Loans (as defined in Note 16 - Debt to our Consolidated Financial Statements included in this Annual Report) and $23.4 million of repurchases of stock associated with employee tax withholdings on vested equity awards, partially offset by proceeds of $450.0 million from the 2026 Convertible Notes (as defined in Note 16 - Debt to our Consolidated Financial Statements included in this Annual Report) and $6.8 million of proceeds from stock option exercises and employee stock purchases. The early prepayment on the Term Loans of $543.6 million was made using $443.6 million of net proceeds from our 2026 Convertible Notes and cash of $100.0 million. See Note 16 - Debt to our Consolidated Financial Statements included in this Annual Report for additional information.
During fiscal year 2020, our cash used in financing activities of $10.7 million was primarily related to $6.9 million of principal payments associated with our Term Loans (as defined in Note 16 - Debt to our Consolidated Financial Statements included in this Annual Report) and $6.7 million in purchases of stock associated with employee tax withholdings, partially offset by $4.6 million of proceeds from stock option exercises and employee stock purchases.
As of October 1, 2021, we held $156.5 million of cash and cash equivalents, primarily deposited with financial institutions as well as $188.4 million of liquid short-term investments. The undistributed earnings of certain foreign subsidiaries are considered indefinitely reinvested for the periods presented and we do not intend to repatriate such earnings. We believe the decision to reinvest these earnings will not have a significant impact on our liquidity. As of October 1, 2021, cash held by our indefinitely reinvested foreign subsidiaries was $27.1 million, which, along with cash generated from foreign operations, is expected to be used in the support of international growth and working capital requirements as well as the repayment of certain intercompany loans. As of October 1, 2021, we had $160.0 million in borrowing capacity under our Revolving Facility (as defined in Note 16 - Debt to our Consolidated Financial Statements included in this Annual Report) that expired undrawn on November 8, 2021.
We plan to use our remaining available cash and cash equivalents as well as our short-term investments for general corporate purposes, including working capital, or for the acquisition of or investment in complementary technologies, design teams, products and businesses. We believe that our cash and cash equivalents, short-term investments and cash generated from operations will be sufficient to meet our working capital requirements for at least the next twelve months. We may need to raise additional capital from time to time through the issuance and sale of equity or debt securities, and there is no assurance that we will be able do so on favorable terms or at all.
As of October 1, 2021, we had no off-balance sheet arrangements.
The following is a summary of our contractual payment obligations for consolidated debt, purchase agreements, leases, financing obligations, other commitments and long-term liabilities as of October 1, 2021 (in thousands):
|Payments Due By Period|
|Contractual Cash Obligations||Total|| Less Than 1 Year|| 1-3 Years|| 3-5 Years||More Than 5 Years|
Principal Payments on Long-term Debt (1)
|$||570,766 ||$||— ||$||120,766 ||$||450,000 ||$||— |
Interest Payments on Long-term Debt (1)
|12,574 ||3,999 ||6,866 ||1,709 ||— |
|Finance Lease Obligations (2)||48,446 ||2,836 ||5,675 ||5,463 ||34,472 |
|Operating Lease Obligations (2)||43,069 ||9,353 ||14,639 ||8,630 ||10,447 |
|Purchase Commitments (3)||135,184 ||103,291 ||9,548 ||3,427 ||18,918 |
|Total Contractual Cash Obligations||$||810,039 ||$||119,479 ||$||157,494 ||$||469,229 ||$||63,837 |
(1)Our Term Loans will mature in May 2024 and our 2026 Convertible Notes will mature in March 2026. The interest rate on the Term Loans is variable, which may result in changes to our interest obligations. See Note 16 - Debt to the Consolidated Financial Statements included in this Annual Report for additional information.
(2)Estimated future lease payments, see Note 18 - Leases to the Consolidated Financial Statements included in this Annual Report for additional information.
(3)We have purchase commitments of $108.0 million primarily related to services and inventory supply arrangements of which approximately $82.7 million that is non-cancelable. In addition, we have $27.2 million in fixed payments associated with a power purchase agreement that is expected to commence in fiscal 2022 and has a 15-year term. See Note 17- Financing Obligation for additional detail on the power purchase agreement.
As of October 1, 2021, we estimated $1.9 million in asset retirement obligations primarily for the restoration of leased facilities upon the termination of the related leases. Although it is reasonably possible that our estimates could change materially in the next twelve months, we are presently unable to reliably estimate when any cash settlement of these obligations may occur.
ITEM 7A. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK
We are exposed to market risk in the ordinary course of business, which consists primarily of interest rate risk associated with our cash and cash equivalents, short-term investments and our variable rate debt, as well as foreign exchange rate risk.
Interest rate risk. The primary objectives of our investment activity are to preserve principal, provide liquidity and invest excess cash for an average rate of return. To minimize market risk, we maintain our portfolio in cash and diversified investments, which may consist of corporate bonds, bank deposits, money market funds and commercial paper. The interest rates are variable and fluctuate with current market conditions. The risk associated with fluctuating interest rates is limited to this investment portfolio. We believe that a 10% change in interest rates would not have a material impact on our financial position or results of operations. We do not enter into financial instruments for trading or speculative purposes.
Our exposure to interest rate risk also relates to the increase or decrease in the amount of interest expense we must pay on the outstanding debt under the Credit Agreement. The interest rates on our term loans are variable interest rates based on our lender’s
prime rate or a LIBOR rate, in each case plus an applicable margin, which exposes us to market interest rate risk when we have outstanding borrowings under the Credit Agreement. As of October 1, 2021, we had $120.8 million of outstanding borrowings under the Credit Agreement. Assuming our outstanding debt remains constant under the Credit Agreement for an entire year and the applicable annual interest rate increases or decreases by 1%, our annual interest expense would increase or decrease by $1.2 million.
Foreign currency risk. To date, our international customer agreements have been denominated primarily in U.S. dollars. Accordingly, we have limited exposure to foreign currency exchange rates. The functional currency of a majority of our foreign operations continues to be in U.S. dollars with the remaining operations being local currency. Changes in the value of the U.S. dollar relative to other currencies could make our products more expensive, which could negatively impact demand in certain regions, reduce or delay customer orders, or otherwise negatively affect how customers do business with us. The effects of exchange rate fluctuations on the net assets of the majority of our operations are accounted for as transaction gains or losses. We believe that a change of 10% in such foreign currency exchange rates would not have a material impact on our financial position or results of operations. In the future, we may enter into foreign currency exchange hedging contracts to reduce our exposure to changes in exchange rates.
ITEM 8. FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA.
INDEX TO FINANCIAL STATEMENTS
REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM
To the stockholders and the Board of Directors of MACOM Technology Solutions Holdings, Inc.
Opinion on the Financial Statements
We have audited the accompanying consolidated balance sheets of MACOM Technology Solutions Holdings, Inc. and subsidiaries (the “Company”) as of October 1, 2021 and October 2, 2020, and the related consolidated statements of operations, comprehensive income (loss), stockholders’ equity, and cash flows, for each of the three years in the period ended October 1, 2021, and the related notes (collectively referred to as the "financial statements"). In our opinion, the financial statements present fairly, in all material respects, the financial position of the Company as of October 1, 2021 and October 2, 2020, and the results of its operations and its cash flows for each of the three years in the period ended October 1, 2021, in conformity with accounting principles generally accepted in the United States of America.
We have also audited, in accordance with the standards of the Public Company Accounting Oversight Board (United States) (PCAOB), the Company's internal control over financial reporting as of October 1, 2021, based on criteria established in Internal Control - Integrated Framework (2013) issued by the Committee of Sponsoring Organizations of the Treadway Commission and our report dated November 15, 2021, expressed an unqualified opinion on the Company's internal control over financial reporting.
Basis for Opinion
These financial statements are the responsibility of the Company's management. Our responsibility is to express an opinion on the Company's financial statements based on our audits. We are a public accounting firm registered with the PCAOB and are required to be independent with respect to the Company in accordance with the U.S. federal securities laws and the applicable rules and regulations of the Securities and Exchange Commission and the PCAOB.
We conducted our audits in accordance with the standards of the PCAOB. Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement, whether due to error or fraud. Our audits included performing procedures to assess the risks of material misstatement of the financial statements, whether due to error or fraud, and performing procedures that respond to those risks. Such procedures included examining, on a test basis, evidence regarding the amounts and disclosures in the financial statements. Our audits also included evaluating the accounting principles used and significant estimates made by management, as well as evaluating the overall presentation of the financial statements. We believe that our audits provide a reasonable basis for our opinion.
Critical Audit Matter
The critical audit matter communicated below is a matter arising from the current-period audit of the financial statements that was communicated or required to be communicated to the audit committee and that (1) relates to accounts or disclosures that are material to the financial statements and (2) involved our especially challenging, subjective, or complex judgments. The communication of critical audit matters does not alter in any way our opinion on the financial statements, taken as a whole, and we are not, by communicating the critical audit matter below, providing a separate opinion on the critical audit matter or on the accounts or disclosures to which it relates.
Inventories – Excess Quantities and Obsolescence — Refer to Notes 2 and 7 to the financial statements
Critical Audit Matter Description
The Company evaluates inventory each reporting period for excess quantities and obsolescence, establishing reserves when necessary based upon historical experience, assessment of economic conditions, and expected demand. Once recorded, these reserves are considered permanent adjustments to the carrying value of inventory. As of October 1, 2021, the Company has inventories of $82.7 million, net of excess quantities and obsolescence reserves.
We identified the reserve for excess quantities and obsolete inventory as a critical audit matter because of the significant estimates and assumptions management makes to quantify and to record the reserve, including the determination of expected demand especially when considering the cyclical nature of the semiconductor industry. This required a high degree of auditor judgment and an increased extent of effort when performing audit procedures to evaluate the methodology and the reasonableness of assumptions including expected demand.
How the Critical Audit Matter Was Addressed in the Audit
Our audit procedures related to the reserve for excess quantities and obsolete inventory including management’s estimate of expected demand, included the following, among others:
•We tested the effectiveness of controls over inventory, including those over the estimation of reserves for excess quantities and obsolescence and the review of any adjustments to the reserve methodology.
•We selected a sample of inventory parts and performed corroborative inquiry with product line managers associated with the selected part to corroborate our understanding of the expected demand and historical consumption of the part including future sales plans, product life cycle, and utilization in other products. For each selected part we tested the calculation of the excess and obsolete reserve pursuant to the Company's policy.
•We held discussions with senior financial and operations management to determine that any strategic, regulatory, or operational changes in the business were consistent with the projections of future demand that were utilized as the basis for the reserves recorded.
•We performed a retrospective review by comparing management’s prior year projections of future demand by product with actual product sales in the current year to identify potential bias in the inventory reserve.
•We compared the Company’s inventory reserve assumptions to events and trends discussed in industry and analyst reports, disclosed in recent press releases from the Company’s major customers (including financial information), and other industry data. In addition, we also considered any changes within the business including restructuring events and strategic changes.
/s/ Deloitte & Touche LLP
|November 15, 2021|
We have served as the Company’s auditor since 2010
MACOM TECHNOLOGY SOLUTIONS HOLDINGS, INC.
CONSOLIDATED BALANCE SHEETS
|Cash and cash equivalents||$||156,537 ||$||129,441 |
|Short-term investments||188,365 ||203,711 |
|Accounts receivable, net||84,570 ||45,884 |
|Inventories||82,699 ||91,584 |
|Prepaid and other current assets||9,365 ||10,899 |
| Total current assets||521,536 ||481,519 |
|Property and equipment, net||120,526 ||118,866 |
|Goodwill||314,240 ||315,012 |
|Intangible assets, net||84,685 ||130,898 |
|Deferred income taxes||39,516 ||41,935 |
|Other investments||15,342 ||17,745 |
|Other long-term assets||38,300 ||40,453 |
|Total assets||$||1,134,145 ||$||1,146,428 |
|LIABILITIES AND STOCKHOLDERS' EQUITY |
|Current portion of finance lease obligations||$||958 ||$||1,368 |
|Current portion of long-term debt||— ||6,885 |
|Accounts payable||28,712 ||23,043 |
|Accrued liabilities||63,374 ||63,654 |
|Total current liabilities||93,044 ||94,950 |
|Finance lease obligations, less current portion||28,037 ||28,994 |
|Financing obligation||8,720 ||— |
|Long-term debt, less current portion||492,097 ||652,172 |
|Warrant liability||— ||25,312 |
|Other long-term liabilities||40,511 ||44,854 |
|Total liabilities||662,409 ||846,282 |
Commitments and contingencies (Note 15)
Preferred stock, $0.001 par value, 10,000 shares authorized, no shares issued
|— ||— |
Common stock, 0.001 par value, 300,000 shares authorized; 68,877 and 66,921 shares issued and 68,854 and 66,898 shares outstanding as of October 1, 2021 and October 2, 2020, respectively
|69 ||67 |
Treasury Stock, at cost, 23 shares as of both October 1, 2021 and October 2, 2020
|Accumulated other comprehensive income||4,150 ||5,009 |
|Additional paid-in capital||1,269,601 ||1,135,127 |
|Total stockholders' equity ||471,736 ||300,146 |
|Total liabilities and stockholders' equity ||$||1,134,145 ||$||1,146,428 |
See notes to consolidated financial statements.
MACOM TECHNOLOGY SOLUTIONS HOLDINGS, INC.
CONSOLIDATED STATEMENTS OF OPERATIONS
(In thousands, except per share data)
|Revenue||$||606,920 ||$||530,037 ||$||499,708 |
|Cost of revenue||265,065 ||259,871 ||279,000 |
|Gross profit||341,855 ||270,166 ||220,708 |
|Research and development||138,844 ||141,333 ||163,469 |
|Selling, general and administrative||122,009 ||124,306 ||153,286 |
|Impairment charges||— ||— ||264,786 |
|Restructuring charges||— ||1,139 ||19,543 |
| Total operating expenses||260,853 ||266,778 ||601,084 |
|Income (loss) from operations||81,002 ||3,388 ||(380,376)|
|Other (expense) income:|
|Warrant liability (expense) gain||(11,130)||(12,948)||765 |
|Interest expense, net||(20,593)||(27,380)||(35,803)|
|Other expense, net||(6,334)||(4,622)||(7,739)|
| Total other expense, net||(38,057)||(44,950)||(42,777)|
|Income (loss) before income taxes||42,945 ||(41,562)||(423,153)|
|Income tax expense (benefit)||4,972 ||4,516 ||(39,355)|
|Net income (loss)||$||37,973 ||$||(46,078)||$||(383,798)|
|Net income (loss) per share:|
| Income (loss) per share - basic||$||0.55 ||$||(0.69)||$||(5.84)|
| Income (loss) per share - diluted||$||0.54 ||$||(0.69)||$||(5.84)|
|Basic||68,449 ||66,606 ||65,686 |
|Diluted||70,474 ||66,606 ||65,686 |
See notes to consolidated financial statements.
MACOM TECHNOLOGY SOLUTIONS HOLDINGS, INC.
CONSOLIDATED STATEMENTS OF COMPREHENSIVE INCOME (LOSS)
|Net income (loss)||$||37,973 ||$||(46,078)||$||(383,798)|
|Unrealized (loss) gain on short-term investments||(198)||193 ||477 |
|Foreign currency translation (loss) gain, net of tax||(661)||458 ||1,693 |
|Other comprehensive (loss) income, net of tax||(859)||651 ||2,170 |
|Total comprehensive income (loss)||$||37,114 ||$||(45,427)||$||(381,628)|
See notes to consolidated financial statements.
MACOM TECHNOLOGY SOLUTIONS HOLDINGS, INC.
CONSOLIDATED STATEMENTS OF STOCKHOLDERS’ EQUITY
|Accumulated Other Comprehensive Income (Loss)||Additional Paid-In Capital||Total|
|Common Stock||Treasury Stock||Accumulated||Stockholders'|
|Balance as of September 28, 2018||65,202 ||$||65 ||(23)||$||(330)||$||2,188 ||$||1,074,728 ||$||(407,976)||$||668,675 |
|Stock option exercises||119 ||— ||— ||— ||— ||1,608 ||— ||1,608 |
|Vesting of restricted common stock and units||673 ||1 ||— ||— ||— ||— ||— ||1 |
|Issuance of common stock pursuant to employee stock purchase plan||422 ||— ||— ||— ||— ||5,585 ||— ||5,585 |
|Shares repurchased for tax withholdings on restricted stock awards||(239)||— ||— ||— ||— ||(4,137)||— ||(4,137)|
|Share-based compensation||— ||— ||— ||— ||— ||23,792 ||— ||23,792 |
|Other comprehensive income, net of tax||— ||— ||— ||— ||2,170 ||— ||— ||2,170 |
|Net loss||— ||— ||— ||— ||— ||— ||(383,798)||(383,798)|
|Balance as of September 27, 2019||66,177 ||$||66 ||(23)||$||(330)||$||4,358 ||$||1,101,576 ||$||(791,774)||$||313,896 |
|Cumulative effect of adoption of ASU 2016-02||— ||— ||— ||— ||— ||— ||(1,875)||(1,875)|